| MRC |
Requirement Statement |
Characteristics |
| CPTF |
FORWARD BEARING SLEEVE OUTSIDE DIAMETER |
24.500 INCHES NOMINAL |
| CPTG |
FORWARD BEARING SLEEVE LENGTH |
1.000 FEET NOMINAL |
| SR-5 |
MANUFACTURERS CODE |
80064 |
| CPJH |
FORWARD END COUPLING DESIGN |
INTEGRAL |
| SR-5 |
DESIGN CONTROL REFERENCE |
DE1040-203-2094477 PC1 |
| NMBR |
QUANTITY |
2 |
| CPTH |
AFTER BEARING SLEEVE OUTSIDE DIAMETER |
24.500 INCHES NOMINAL |
| CPJK |
FORWARD END COUPLING OUTSIDE DIAMETER |
35.375 INCHES NOMINAL |
| AARX |
INSIDE DIAMETER |
5.750 INCHES MINIMUM AND 14.500 INCHES MAXIMUM |
| ABQB |
TAPER MAJOR DIAMETER |
22.250 INCHES NOMINAL |
| CPTC |
AFTER END DESIGN |
TAPERED |
| APZX |
PROTECTIVE COVERING TYPE |
RUBBER, SYNTHETIC |
| CPNF |
THREADED FORWARD END |
NOT INCLUDED |
| ABHP |
OVERALL LENGTH |
43.667 FEET NOMINAL |
| CPJM |
FORWARD END COUPLING THICKNESS |
4.500 INCHES NOMINAL |
| ARQS |
CONSTRUCTION |
HOLLOW |
| SR-5 |
THE MANUFACTURERS DATA |
|
| ABKV |
OUTSIDE DIAMETER |
22.250 INCHES NOMINAL |
| CPJG |
AFTER END KEYWAY |
PROVIDED |
| ABND |
TAPER LENGTH |
3.604 FEET NOMINAL |
| AGYE |
SURFACE FINISH |
SMOOTH MACHINED |
| AEJZ |
DEPTH |
1.742 INCHES NOMINAL |
| ABET |
THREAD LENGTH |
13.250 INCHES |
| CPTD |
THREADED AFTER END |
INCLUDED |
| MATL |
MATERIAL |
STEEL,MIL,MIL-S-890,CL AN,W/O NICKEL AMEND. 4,FORGED |
| CPJL |
FORWARD END COUPLING LENGTH |
0.750 FEET NOMINAL |
| AAZR |
MAJOR DIAMETER |
15.250 INCHES NOMINAL |
| ABGL |
WIDTH |
3.750 INCHES MINIMUM AND 3.812 INCHES MAXIMUM |
| CPJF |
FORWARD END KEYWAY |
NOT PROVIDED |
| AZRW |
THREAD QUANTITY |
4 PER INCH |
| CPTS |
COVERING LOCATION |
SURFACES BETWEEN BEARING SLEEVE |
| BPJZ |
USAGE LOCATION |
CENTER |
| CPTP |
AFTER BEARING SLEEVE LENGTH |
7.698 FEET NOMINAL |
| CPJJ |
FORWARD END COUPLING TYPE |
FLANGE |
| APQB |
UNIT TYPE |
PROPELLER SHAFT SECTION |
| CTKF |
TAPER |
1.000 PER FOOT IN INCHES NOMINAL |
