| MRC |
Requirement Statement |
Characteristics |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
QQ-P-416,TY 1,CL 2 FED SPEC SINGLE TREATMENT RESPONSE ALL EXTERNAL/EXPOSED METAL SURFACES |
| AAJF |
THREAD DIRECTION |
LEFT-HAND |
| CQJX |
NOMINAL THREAD SIZE |
0.375 INCHES |
| CTLK |
SELF-ALIGNMENT ANGLE |
10.00 DEGREES NOMINAL |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
MIL-S-7420 MIL SPEC SINGLE MATERIAL RESPONSE BALL MIL-S-7420 MIL SPEC SINGLE MATERIAL RESPONSE INNER RACE MIL-S-6758 MIL SPEC SINGLE MATERIAL RESPONSE OUTER RACE AISI ASSN STD SINGLE MATERIAL RESPONSE RETAINER MIL-S-6758 MIL SPEC SINGLE MATERIAL RESPONSE ROD END BODY AMS 3652 ASSN STD SINGLE MATERIAL RESPONSE SEAL |
| FEAT |
SPECIAL FEATURES |
80 PCT OF SPECIFIED LUBRICATION |
| ADZG |
LUBRICATION MATERIAL |
GREASE |
| ABHP |
OVERALL LENGTH |
1.7655 INCHES NOMINAL |
| STYL |
STYLE DESIGNATOR |
DOUBLE ROW, STAGGERED, BALL |
| AGZA |
ALIGNMENT TYPE |
SELF-ALIGNING |
| SFTT |
SURFACE TREATMENT |
CADMIUM ALL EXTERNAL/EXPOSED METAL SURFACES |
| THSD |
THREAD SERIES DESIGNATOR |
UNJF |
| AAZF |
SHANK STYLE |
EXTERNALLY THREADED |
| AAJD |
THREAD CLASS |
3A |
| AGXH |
LENGTH FROM BORE CENTER TO SHANK END |
1.3650 INCHES MINIMUM AND 1.3850 INCHES MAXIMUM |
| ABXV |
BORE DIAMETER |
0.1897 INCHES MINIMUM AND 0.1900 INCHES MAXIMUM |
| MATT |
MATERIAL |
STEEL COMP E52100 BALL STEEL COMP E52100 INNER RACE STEEL COMP 4130 OUTER RACE STEEL COMP 301 RETAINER STEEL COMP 4130 ROD END BODY PLASTIC POLYTETRAFLUOROETHYLENE SEAL |
| AGGY |
SHANK THREAD LENGTH |
0.7190 INCHES MINIMUM AND 0.7810 INCHES MAXIMUM |
| CMLP |
THREAD QUANTITY PER INCH |
24 |
| AHAW |
SELF-ALIGNMENT LOCATION |
EXTERNAL |
| AGVU |
INNER RING WIDTH |
0.4320 INCHES MINIMUM AND 0.4370 INCHES MAXIMUM |
| AAZE |
SHANK DIAMETER |
0.3750 INCHES MAXIMUM |
| AGYW |
BEARING SEAL TYPE |
CONTACT |
| ADGA |
OVERALL OUTSIDE DIAMETER |
0.7710 INCHES MINIMUM AND 0.7910 INCHES MAXIMUM |
| AGYJ |
SEAL QUANTITY |
2 |
| AGYF |
RETAINER FABRICATION METHOD |
PRESSED |
| AGVT |
OUTER RING WIDTH |
0.3180 INCHES MINIMUM AND 0.3380 INCHES MAXIMUM |
| LMDC |
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION |
MIL-G-81322 MIL SPEC SINGLE MATERIAL RESPONSE |
