| MRC |
Requirement Statement |
Characteristics |
| AKAU |
FIRST LEG HOLE ARRANGEMENT STYLE |
TWO HOLES |
| AHRB |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
1.188 INCHES NOMINAL |
| AHLH |
SECOND LEG END WIDTH |
3.500 INCHES NOMINAL |
| AJZU |
FIRST LEG STYLE |
SQUARE AND TAPERED |
| AHQN |
FIRST LEG WIDTH |
5.750 INCHES NOMINAL |
| AHPX |
SECOND LEG THICKNESS |
0.115 INCHES MINIMUM AND 0.135 INCHES MAXIMUM |
| SR-5 |
THE MANUFACTURERS DATA |
|
| ADLK |
FIRST LEG LENGTH |
2.250 INCHES NOMINAL |
| SR-5 |
DESIGN CONTROL REFERENCE |
2427816 |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
QQ-P-416,TY 2,CL2 FED SPEC ALL TREATMENT RESPONSES |
| SR-5 |
MANUFACTURERS CODE |
10001 |
| MATT |
MATERIAL |
STEEL COMP 1010 |
| AHPW |
FIRST LEG THICKNESS |
0.115 INCHES MINIMUM AND 0.135 INCHES MAXIMUM |
| AHQQ |
FIRST LEG END WIDTH |
5.500 INCHES NOMINAL |
| SFTT |
SURFACE TREATMENT |
CADMIUM AND CHROMATE |
| CSSQ |
FIRST LEG ANGLE |
90.0 DEGREES NOMINAL |
| AKBU |
SECOND LEG STYLE |
SQUARE AND TAPERED |
| ADLL |
SECOND LEG LENGTH |
3.000 INCHES NOMINAL |
| AHQU |
FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH |
4.990 INCHES MINIMUM AND 5.010 INCHES MAXIMUM |
| AHLK |
FIRST LEG HOLE DIAMETER |
0.280 INCHES MINIMUM AND 0.287 INCHES MAXIMUM |
| AHRA |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.375 INCHES NOMINAL |
| STYL |
STYLE DESIGNATOR |
ANGLE |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
66 FED STD SINGLE MATERIAL RESPONSE |
| AHLF |
SECOND LEG WIDTH |
3.750 INCHES NOMINAL |
