| MRC |
Requirement Statement |
Characteristics |
| CRGD |
POWER DISSIPATION RATING PER SECTION IN WATTS |
2.0 FREE AIR ALL SECTIONS |
| CRGM |
FUNCTION CONFORMITY PER SECTION |
ALL SECTIONS INDEPENDENT LINEARITY |
| CSDH |
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER |
85.0 ALL SECTIONS |
| AEDX |
SHAFT STYLE |
ROUND |
| AAVM |
PILOT LENGTH |
0.0620 INCHES NOMINAL |
| AAPN |
SECTION QUANTITY |
2 |
| ABPC |
UNDERCUT WIDTH |
0.0620 INCHES NOMINAL |
| AEDZ |
SHAFT BEARING TYPE |
BEARING |
| AAQL |
BODY STYLE |
CYLINDRICAL SERVO MOUNTED |
| CQCH |
TAP LOCATION FROM CCW TERMINAL PER SECTION IN DEG OF EFFECTIVE ELECTRICAL ROTATION |
0.0 ALL SECTIONS |
| AEFD |
ACTUATOR TYPE |
SINGLE SHAFT |
| ABXF |
SHAFT LENGTH |
0.370 INCHES NOMINAL |
| AECZ |
MOUNTING LIP DIAMETER |
0.5000 INCHES NOMINAL |
| CRSX |
ACTUATOR TRAVEL CONTROL FEATURE |
CONTINUOUS MOTION |
| CSBX |
FUNCTION CHARACTERISTIC PER SECTION |
ALL SECTIONS LINEAR |
| TEST |
TEST DATA DOCUMENT |
19315-1908926 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
| CRKS |
TAP LOCATION TOLERANCE PER SECTION |
-5.0 TO 5.0 DEG ANGULAR ROTATION ALL SECTIONS |
| AARG |
RELIABILITY INDICATOR |
NOT ESTABLISHED |
| CRSS |
RESISTANCE TOLERANCE PER SECTION IN PERCENT |
-20.0 TO 20.0 ALL SECTIONS |
| CQFL |
FUNCTION CONFORMITY TOLERANCE PER SECTION |
-0.01 TO 0.01 ALL SECTIONS |
| APXH |
TERMINAL LOCATION |
RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE |
| AEFH |
EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION |
254.0 NOMINAL |
| FEAT |
SPECIAL FEATURES |
127 DEG TO RIGHT AND LEFT OF CENTER TAP |
| CRJS |
FIXED TAP QUANTITY PER SECTION |
1 ALL SECTIONS |
| TTQY |
TERMINAL TYPE AND QUANTITY |
8 WIRE LEAD |
| AXGY |
MOUNTING METHOD |
CLAMP RING |
| AEDA |
MOUNTING LIP DEPTH |
0.0620 INCHES NOMINAL |
| CQCK |
ROTARY ACTUATOR TRAVEL IN ANGULAR DEG |
360.0 NOMINAL |
| ABWV |
SHAFT DIAMETER |
0.0932 INCHES MINIMUM AND 0.0937 INCHES MAXIMUM |
| AAVL |
PILOT DIAMETER |
0.3750 INCHES NOMINAL |
| ADAQ |
BODY LENGTH |
0.785 INCHES MAXIMUM |
| ABPA |
UNDERCUT DIAMETER |
0.375 INCHES NOMINAL |
| CQGN |
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER |
125.0 ALL SECTIONS |
| ABPM |
BODY DIAMETER |
0.500 INCHES NOMINAL |
| CQCC |
ELECTRICAL RESISTANCE PER SECTION |
10.000 KILOHMS ALL SECTIONS |
