| MRC |
Requirement Statement |
Characteristics |
| ADAR |
BODY OUTSIDE DIAMETER |
2.562 INCHES NOMINAL |
| AXHR |
MOUNTING FACILITY TYPE AND QUANTITY |
4 UNTHREADED HOLE |
| STYL |
STYLE DESIGNATOR |
ROUND TERMINAL/TERMINALS ON OPPOSITE SURFACES |
| CRBB |
FREQUENCY BAND WIDTH PER FUNCTION |
1.03 KILOHERTZ BLANK AND 1.18 KILOHERTZ BLANK |
| ADAU |
BODY HEIGHT |
3.234 INCHES MINIMUM AND 3.375 INCHES MAXIMUM |
| ABMK |
OVERALL WIDTH |
2.562 INCHES NOMINAL |
| AEBY |
DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY LENGTH |
2.094 INCHES NOMINAL |
| CRBC |
III DISCRIMINATION AT SPECIFIED FREQUENCIES PER FUNCTION IN DECIBELS |
24.0 MINIMUM BLANK AND 6.0 NOMINAL BLANK AND 6.0 NOMINAL BLANK AND 24.0 MINIMUM BLANK |
| AHAS |
LOAD IMPEDANCE PER FUNCTION |
600.0 OHMS BLANK |
| AHBX |
DISTANCE BETWEEN MOUNTING SURFACE AND LOWER END |
0.453 INCHES NOMINAL |
| CQDR |
INSERTION LOSS AT REFERENCE FREQUENCY PER FUNCTION IN DECIBELS |
6.0 BLANK |
| AEBV |
UNTHREADED MOUNTING HOLE DIAMETER |
0.177 INCHES NOMINAL |
| ABHP |
OVERALL LENGTH |
2.562 INCHES NOMINAL |
| AHAQ |
SOURCE IMPEDANCE RATING PER FUNCTION |
600.0 OHMS BLANK |
| AHAJ |
REFERENCE FREQUENCY PER FUNCTION |
1.105 KILOHERTZ BLANK |
| AKNA |
INCLOSURE TYPE |
HERMETICALLY SEALED |
| ABKW |
OVERALL HEIGHT |
3.703 INCHES NOMINAL |
| CQDW |
FUNCTIONAL TERMINAL TYPE AND QUANTITY |
1 TAB, SOLDER LUG INPUT 1ST FUNCTION 1 TAB, SOLDER LUG OUTPUT 2ND FUNCTION 1 TAB, SOLDER LUG GROUND 3RD FUNCTION |
| CQFC |
III SPECIFIED FREQUENCIES OF DISCRIMINATION PER FUNCTION |
935.00 HERTZ BLANK AND 1.03 KILOHERTZ BLANK AND 1.18 KILOHERTZ BLANK AND 1.275 KILOHERTZ BLANK |
