| MRC |
Requirement Statement |
Characteristics |
| ABKQ |
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH |
6.052 INCHES MINIMUM AND 6.072 INCHES MAXIMUM SINGLE MOUNTING FACILITY |
| ADZC |
ENVIRONMENTAL PROTECTION |
CORROSION RESISTANT |
| TTQY |
TERMINAL TYPE AND QUANTITY |
6 SCREW ALL FUNCTIONS |
| APNA |
WINDING DC RESISTANCE RATING |
130.0 OHMS NOMINAL SINGLE WINDING |
| ABHP |
OVERALL LENGTH |
6.562 INCHES NOMINAL |
| AEBV |
UNTHREADED MOUNTING HOLE DIAMETER |
0.191 INCHES MINIMUM AND 0.206 INCHES MAXIMUM SINGLE MOUNTING FACILITY |
| CQYJ |
MOUNTING FACILITY PATTERN |
RECTANGULAR SINGLE MOUNTING FACILITY |
| PMLC |
III PRECIOUS MATERIAL AND LOCATION |
TERMINALS SILVER |
| CRNG |
NONPILE-UP MAIN CONTACT ARRANGEMENT |
2 POLE, SINGLE THROW, NORMALLY OPEN, MOMENTARY ACTION AND 1 POLE, SINGLE THROW, NORMALLY CLOSED, MOMENTARY ACTION |
| CWAB |
MAIN CONTACT MAXIMUM VOLTAGE RATING IN VOLTS |
28.0 DC |
| AXHR |
MOUNTING FACILITY TYPE AND QUANTITY |
4 UNTHREADED HOLE SINGLE MOUNTING FACILITY |
| CSXF |
OPERATING VOLTAGE RATING AND TYPE AT SPECIFIED TEMP |
28.0 VOLTS DC 25 DEG CELSIUS SINGLE WINDING |
| AFJN |
III FRAGILITY FACTOR |
MODERATELY RUGGED |
| ADTV |
III CASE MATERIAL |
METAL |
| AKSL |
III PURPOSE FOR WHICH DESIGNED |
GENERAL |
| AKDX |
WINDING QUANTITY |
1 |
| ABKR |
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH |
2.031 INCHES NOMINAL SINGLE MOUNTING FACILITY |
| BBRG |
III STORAGE TYPE |
GENERAL PURPOSE WAREHOUSE |
| PRMT |
III PRECIOUS MATERIAL |
SILVER |
| APCN |
COIL QUANTITY |
1 |
| ABKW |
OVERALL HEIGHT |
3.375 INCHES MAXIMUM |
| ABMK |
OVERALL WIDTH |
2.812 INCHES NOMINAL |
| CTDL |
MAIN CONTACT LOAD CURRENT RATING AT MAXIMUM RATED VOLTAGE |
5.0 AMPERES DC RESISTIVE LOAD 5.0 AMPERES DC INDUCTIVE LOAD |
| APNP |
DUTY TYPE |
CONTINUOUS |
| CBME |
III CUBIC MEASURE |
62.278 CUBIC INCHES |
