| MRC |
Requirement Statement |
Characteristics |
| ZZZK |
SPECIFICATION/STANDARD DATA |
96906-MS25329 GOVERNMENT STANDARD |
| APNQ |
ARC QUENCHING METHOD |
AIR |
| AEBV |
UNTHREADED MOUNTING HOLE DIAMETER |
0.147 INCHES NOMINAL SINGLE MOUNTING FACILITY |
| TTQY |
TERMINAL TYPE AND QUANTITY |
20 PIN ALL FUNCTIONS |
| SR-1 |
SPEC/STD CONTROLLING DATA |
|
| AJSS |
FREQUENCY IN HERTZ |
400.0 NOMINAL |
| AXHR |
MOUNTING FACILITY TYPE AND QUANTITY |
3 UNTHREADED HOLE SINGLE MOUNTING FACILITY |
| ADZC |
ENVIRONMENTAL PROTECTION |
HERMETIC |
| SR-1 |
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE |
MS25329-A1 |
| ABHP |
OVERALL LENGTH |
2.187 INCHES MAXIMUM |
| AFJN |
III FRAGILITY FACTOR |
MODERATELY RUGGED |
| ADTV |
III CASE MATERIAL |
METAL |
| SR-1 |
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE |
MIL-PRF-6106 |
| ABKW |
OVERALL HEIGHT |
2.156 INCHES NOMINAL |
| CQYJ |
MOUNTING FACILITY PATTERN |
TRIANGLE SINGLE MOUNTING FACILITY |
| SR-1 |
MANUFACTURERS CODE |
81349 |
| AKSL |
III PURPOSE FOR WHICH DESIGNED |
GENERAL |
| CSXF |
OPERATING VOLTAGE RATING AND TYPE AT SPECIFIED TEMP |
115.0 VOLTS AC 25 DEG CELSIUS SINGLE WINDING |
| AKDX |
WINDING QUANTITY |
1 |
| CSQJ |
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO THE ALTITUDE OF AN ISOSCELES TRIANGLE |
1.844 INCHES NOMINAL SINGLE MOUNTING FACILITY |
| BBRG |
III STORAGE TYPE |
GENERAL PURPOSE WAREHOUSE |
| APCN |
COIL QUANTITY |
1 |
| CWAB |
MAIN CONTACT MAXIMUM VOLTAGE RATING IN VOLTS |
115.0 AC AND 28.0 DC |
| CRNG |
NONPILE-UP MAIN CONTACT ARRANGEMENT |
6 POLE, DOUBLE THROW, ONE POSITION MOMENTARY |
| ABMK |
OVERALL WIDTH |
1.531 INCHES MAXIMUM |
| SR-1 |
MANUFACTURERS CODE |
96906 |
| CTDL |
MAIN CONTACT LOAD CURRENT RATING AT MAXIMUM RATED VOLTAGE |
5.0 AMPERES AC AND 5.0 AMPERES DC RESISTIVE LOAD 3.0 AMPERES AC AND 3.0 AMPERES DC INDUCTIVE LOAD 800.0 MILLIAMPERES AC AND 800.0 MILLIAMPERES DC LAMP LOAD 1.5 AMPERES AC AND 1.5 AMPERES DC MOTOR LOAD |
| CRXH |
TIME DELAY |
0.02 SECONDS MAXIMUM FIXED OPERATE TIME 0.05 SECONDS MAXIMUM FIXED RELEASE TIME |
| CBME |
III CUBIC MEASURE |
7.218 CUBIC INCHES |
| ABKR |
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH |
0.750 INCHES NOMINAL SINGLE MOUNTING FACILITY |
| APNP |
DUTY TYPE |
CONTINUOUS |
