| MRC |
Requirement Statement |
Characteristics |
| APNQ |
ARC QUENCHING METHOD |
AIR |
| CBME |
III CUBIC MEASURE |
36.294 CUBIC INCHES |
| SR-1 |
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE |
MS27222-1 |
| ABKR |
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH |
2.687 INCHES NOMINAL SINGLE MOUNTING FACILITY |
| SR-1 |
SPEC/STD CONTROLLING DATA |
|
| CQYJ |
MOUNTING FACILITY PATTERN |
RECTANGULAR SINGLE MOUNTING FACILITY |
| CRXH |
TIME DELAY |
0.025 SECONDS MAXIMUM FIXED OPERATE TIME 0.05 SECONDS MAXIMUM FIXED RELEASE TIME |
| TTQY |
TERMINAL TYPE AND QUANTITY |
8 THREADED STUD ALL FUNCTIONS |
| ADZC |
ENVIRONMENTAL PROTECTION |
HERMETIC |
| ABKW |
OVERALL HEIGHT |
2.941 INCHES MAXIMUM |
| AXHR |
MOUNTING FACILITY TYPE AND QUANTITY |
4 UNTHREADED HOLE SINGLE MOUNTING FACILITY |
| CSXF |
OPERATING VOLTAGE RATING AND TYPE AT SPECIFIED TEMP |
28.0 VOLTS DC 25 DEG CELSIUS SINGLE WINDING |
| AFJN |
III FRAGILITY FACTOR |
MODERATELY RUGGED |
| ADTV |
III CASE MATERIAL |
METAL |
| SR-1 |
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE |
MIL-PRF-6106 |
| ZZZK |
SPECIFICATION/STANDARD DATA |
96906-MS27222 GOVERNMENT STANDARD |
| ABMK |
OVERALL WIDTH |
3.305 INCHES MAXIMUM |
| SR-1 |
MANUFACTURERS CODE |
81349 |
| AKSL |
III PURPOSE FOR WHICH DESIGNED |
GENERAL |
| AKDX |
WINDING QUANTITY |
1 |
| CRNG |
NONPILE-UP MAIN CONTACT ARRANGEMENT |
3 POLE, SINGLE THROW, NORMALLY OPEN, DOUBLE MAKE, MOMENTARY ACTION |
| BBRG |
III STORAGE TYPE |
GENERAL PURPOSE WAREHOUSE |
| APCN |
COIL QUANTITY |
1 |
| APNA |
WINDING DC RESISTANCE RATING |
51.0 OHMS NOMINAL SINGLE WINDING |
| CWAB |
MAIN CONTACT MAXIMUM VOLTAGE RATING IN VOLTS |
115.0 AC AND 28.0 DC |
| ABHP |
OVERALL LENGTH |
3.734 INCHES MAXIMUM |
| SR-1 |
MANUFACTURERS CODE |
96906 |
| AEBV |
UNTHREADED MOUNTING HOLE DIAMETER |
0.218 INCHES NOMINAL SINGLE MOUNTING FACILITY |
| CTDL |
MAIN CONTACT LOAD CURRENT RATING AT MAXIMUM RATED VOLTAGE |
50.0 AMPERES AC AND 50.0 AMPERES DC RESISTIVE LOAD 50.0 AMPERES AC AND 50.0 AMPERES DC INDUCTIVE LOAD 50.0 AMPERES AC AND 50.0 AMPERES DC MOTOR LOAD |
| ABKQ |
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH |
3.250 INCHES NOMINAL SINGLE MOUNTING FACILITY |
| APNP |
DUTY TYPE |
CONTINUOUS |
