| MRC |
Requirement Statement |
Characteristics |
| CRHN |
SHAFT SLOT WIDTH |
0.0250 INCHES NOMINAL SINGLE SHAFT |
| AJSL |
BODY SIZE |
8 |
| ABPC |
UNDERCUT WIDTH |
0.0620 INCHES NOMINAL |
| AJTM |
ZRS IMPEDANCE ANGLE IN DEG |
17.50 NOMINAL |
| AJTK |
ZSO IMPEDANCE ANGLE IN DEG |
71.00 NOMINAL |
| AJSS |
FREQUENCY IN HERTZ |
400.0 NOMINAL |
| AJVF |
PHASE SHIFT ANGLE IN DEG |
13.000 INPUT TO OUTPUT NOMINAL |
| AJVS |
ACTUATOR FRICTION TORQUE AT MINUS 55 DEG CELSIUS |
12.00 CENTIMETER-GRAMS NOMINAL |
| CQZS |
SHAFT SLOT DEPTH |
0.0300 INCHES NOMINAL SINGLE SHAFT |
| AAVL |
PILOT DIAMETER |
0.4995 INCHES MINIMUM AND 0.5000 INCHES MAXIMUM |
| ABHP |
OVERALL LENGTH |
1.7110 INCHES MINIMUM AND 1.7260 INCHES MAXIMUM |
| CSJY |
TRANSFORMATION RATIO |
0.454 STATOR TO ROTOR NOMINAL |
| AJTG |
ZRO IMPEDANCE MAGNITUDE IN OHMS |
269.00 NOMINAL |
| TTQY |
TERMINAL TYPE AND QUANTITY |
5 WIRE LEAD |
| CQTM |
TERMINAL LOCATION |
REAR |
| AJTL |
ZRS IMPEDANCE MAGNITUDE IN OHMS |
126.00 NOMINAL |
| ABXF |
SHAFT LENGTH |
0.4610 INCHES MINIMUM AND 0.4860 INCHES MAXIMUM SINGLE SHAFT |
| CRSJ |
SHAFT TYPE |
ROUND, SLOTTED SINGLE SHAFT |
| ABKU |
FLANGE THICKNESS |
0.0620 INCHES NOMINAL |
| AJWX |
MOUNTING SURFACE TO TERMINAL END DISTANCE |
1.2400 INCHES MAXIMUM |
| ABWV |
SHAFT DIAMETER |
0.1195 INCHES MINIMUM AND 0.1200 INCHES MAXIMUM SINGLE SHAFT |
| AJVT |
ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS |
3.00 CENTIMETER-GRAMS NOMINAL |
| AAQL |
BODY STYLE |
STANDARD ROUND A |
| AJTH |
ZRO IMPEDANCE ANGLE IN DEG |
75.00 NOMINAL |
| AJWQ |
PILOT LENGTH |
0.0400 INCHES NOMINAL |
| AJTJ |
ZSO IMPEDANCE MAGNITUDE IN OHMS |
52.00 NOMINAL |
| ABKK |
FLANGE DIAMETER |
0.7500 INCHES NOMINAL |
| ABPA |
UNDERCUT DIAMETER |
0.6870 INCHES NOMINAL |
