| MRC |
Requirement Statement |
Characteristics |
| AKAF |
SHAFT THREAD DIRECTION |
RIGHT-HAND SINGLE SHAFT |
| CWYF |
III SHAFT END PLAY DETERMINING WEIGHT |
16.0 OUNCES |
| AJSN |
STATOR INPUT VOLTAGE RATING IN VOLTS |
8.0 MINIMUM AND 50.0 MAXIMUM |
| AJVF |
PHASE SHIFT ANGLE IN DEG |
7.164 INPUT TO OUTPUT MINIMUM AND 7.236 INPUT TO OUTPUT MAXIMUM |
| ABKU |
FLANGE THICKNESS |
0.2480 INCHES MINIMUM AND 0.2500 INCHES MAXIMUM |
| AJTS |
ROTOR DC RESISTANCE IN OHMS |
260.30 MINIMUM AND 287.70 MAXIMUM |
| AJWV |
AFT OF FIRST FLANGE DIAMETER |
1.9940 INCHES MINIMUM AND 1.9950 INCHES MAXIMUM |
| AJTJ |
ZSO IMPEDANCE MAGNITUDE IN OHMS |
570.00 NOMINAL |
| AJXB |
III SHAFT MAXIMUM RUNOUT |
0.0020 INCHES |
| AAFZ |
BODY MATERIAL |
ALUMINUM |
| ABPM |
BODY DIAMETER |
1.9840 INCHES NOMINAL |
| AJWQ |
PILOT LENGTH |
0.0430 INCHES NOMINAL |
| AJSP |
STATOR INPUT CURRENT RATING |
40.0 MILLIAMPERES NOMINAL |
| AJSS |
FREQUENCY IN HERTZ |
60.0 NOMINAL |
| CQWQ |
SHAFT THREAD LENGTH |
0.3100 INCHES MINIMUM AND 0.3400 INCHES MAXIMUM SINGLE SHAFT |
| TEST |
TEST DATA DOCUMENT |
10001-1233385 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
| CRSJ |
SHAFT TYPE |
ROUND, THREADED SINGLE SHAFT |
| CWBH |
SHAFT NOMINAL THREAD SIZE |
0.240 INCHES SINGLE SHAFT |
| AKAN |
SHAFT THREAD CLASS |
3A SINGLE SHAFT |
| AJWR |
SHOULDER LENGTH |
0.4190 INCHES MINIMUM AND 0.4200 INCHES MAXIMUM |
| AAVL |
PILOT DIAMETER |
0.5990 INCHES MINIMUM AND 0.6000 INCHES MAXIMUM |
| ABXF |
SHAFT LENGTH |
0.6100 INCHES MINIMUM AND 0.6300 INCHES MAXIMUM SINGLE SHAFT |
| SR-5 |
THE MANUFACTURERS DATA |
|
| AJWX |
MOUNTING SURFACE TO TERMINAL END DISTANCE |
3.6170 INCHES NOMINAL |
| AJSR |
ROTOR INPUT VOLTAGE RATING IN VOLTS |
NOT RATED |
| ABHP |
OVERALL LENGTH |
4.7430 INCHES MINIMUM AND 4.8550 INCHES MAXIMUM |
| AJYY |
SHAFT THREAD SERIES DESIGNATOR |
UNF SINGLE SHAFT |
| AJST |
ROTOR INPUT CURRENT RATING |
NOT RATED |
| SR-5 |
MANUFACTURERS CODE |
10001 |
| AJTT |
STATOR DC RESISTANCE IN OHMS |
72.96 MINIMUM AND 80.43 MAXIMUM |
| AJVG |
MAXIMUM FUNDAMENTAL NULL VOLTAGE IN MILLIVOLTS PER VOLT |
0.02 OUTPUT |
| AJSV |
ROTOR INPUT ELECTRICAL POWER RATING |
NOT RATED |
| AJSL |
BODY SIZE |
23 |
| SR-5 |
DESIGN CONTROL REFERENCE |
1233385 |
| CQTM |
TERMINAL LOCATION |
REAR |
| AJTK |
ZSO IMPEDANCE ANGLE IN DEG |
79.00 NOMINAL |
| AAVH |
SHOULDER DIAMETER |
1.9940 INCHES MINIMUM AND 1.9950 INCHES MAXIMUM |
| AJSQ |
STATOR INPUT ELECTRICAL POWER RATING |
200.0 MILLIWATTS NOMINAL |
| AJWH |
III SHAFT END PLAY |
0.0060 INCHES MAXIMUM |
| AAZW |
SECOND SHOULDER DIAMETER |
1.9985 INCHES MINIMUM AND 1.9995 INCHES MAXIMUM |
| AAQL |
BODY STYLE |
STANDARD ROUND D |
| TTQY |
TERMINAL TYPE AND QUANTITY |
8 SCREW |
| ABWV |
SHAFT DIAMETER |
0.2400 INCHES MINIMUM AND 0.2405 INCHES MAXIMUM SINGLE SHAFT |
| AAZX |
SECOND SHOULDER LENGTH |
0.1700 INCHES MINIMUM AND 0.1720 INCHES MAXIMUM |
| ABKK |
FLANGE DIAMETER |
2.2490 INCHES MINIMUM AND 2.2500 INCHES MAXIMUM |
