| FEAT |
SPECIAL FEATURES |
FIBER OPTIC CABLE SHOULD CONSIST OF A SINGLE FUSED SILICA,PARTIALLY GRADED INDEX; GLASS CLAD FIBER SURROUNDED BY SILICONE COATING; BUFFER JACKET; AND TENSILE STRENGTH MEMBERS; THEN COVERED BY SCUFF-RESISTANT OUTER JACKET; PROPAGATION DELAYS INCREASE AT 5 NS PER METER OF CABLE LENGTH INCREASE; DATA RATE: AS LIMITED BY PULSE WIDTH DISTORTION,IS NOT AFFECTED BY INCREASING CABLE LENGTH,IF THE OPTICAL POWER LEVEL IS MAINTAINED; NOMINAL PROPAGATION DELAY 6 NS; CABLE LENGTH SHALL BE 11.500 NOMINAL TO 12.000 INCHES MAXIMUM; FORWARD PEAK CURRENT: SHOULD NOT BE LESS THAN 10.0 MA,IN THE ON STATE WITH NO DUTY FACTOR RESTRICTION; OPERATING TEMPERATURE: MINUS 20.0 TO PLUS 70.0 DEGREES CELSIUS MAX; FLEXING: 180.0 DEGREES BENDING AT MINIMUM BEND RADIUS OF 20.0 MM NO LOAD,TO A TENSILE LOAD OF 2.25 POUNDS MAX; CABLE CONNECTORS 0.300 TO 0.330 INCHES HEX NOMINAL; THREAD ENDS ARE 0.250-36 UNF-2B |
