| MRC |
Requirement Statement |
Characteristics |
| AHQN |
FIRST LEG WIDTH |
9.000 INCHES NOMINAL |
| AHLP |
SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH |
6.430 INCHES MINIMUM AND 6.450 INCHES MAXIMUM |
| ADLK |
FIRST LEG LENGTH |
1.750 INCHES NOMINAL |
| AHLV |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
1.000 INCHES NOMINAL |
| AKCU |
SECOND LEG HOLE ARRANGEMENT STYLE |
TWO HOLES |
| STYL |
STYLE DESIGNATOR |
DOUBLE ANGLE |
| FEAT |
SPECIAL FEATURES |
SECOND SLOT ON FIRST LEG HOLE ARRANGEMENT STYLE WITH SAME DIMENSIONSAS OPPOSITE SIDE |
| AHPW |
FIRST LEG THICKNESS |
0.250 INCHES NOMINAL |
| AHPX |
SECOND LEG THICKNESS |
0.250 INCHES NOMINAL |
| AHLW |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.550 INCHES NOMINAL |
| SR-5 |
MANUFACTURERS CODE |
19204 |
| AHQA |
CENTER SECTION WIDTH |
9.000 INCHES NOMINAL |
| SR-5 |
THE MANUFACTURERS DATA |
|
| ADLL |
SECOND LEG LENGTH |
2.300 INCHES NOMINAL |
| AHRB |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.750 INCHES NOMINAL |
| SR-5 |
DESIGN CONTROL REFERENCE |
10885130 |
| AHLF |
SECOND LEG WIDTH |
9.000 INCHES NOMINAL |
| AHPZ |
CENTER SECTION HEIGHT |
9.310 INCHES NOMINAL |
| AHQB |
CENTER SECTION THICKNESS |
0.250 INCHES NOMINAL |
| CSSQ |
FIRST LEG ANGLE |
90.0 DEGREES NOMINAL |
| AHLN |
SECOND LEG HOLE DIAMETER |
0.464 INCHES MINIMUM AND 0.484 INCHES MAXIMUM |
| AHLS |
SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTH |
0.650 INCHES MINIMUM AND 0.670 INCHES MAXIMUM |
| AHLM |
FIRST LEG SLOT WIDTH |
0.530 INCHES NOMINAL |
| AKBU |
SECOND LEG STYLE |
SQUARE |
| AHRA |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
1.030 INCHES NOMINAL |
| CSSR |
SECOND LEG ANGLE |
90.0 DEGREES NOMINAL |
| AHLL |
FIRST LEG SLOT LENGTH |
0.820 INCHES NOMINAL |
