| MRC |
Requirement Statement |
Characteristics |
| SFTT |
SURFACE TREATMENT |
ANODIZE |
| AHLV |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.125 INCHES NOMINAL |
| AKCU |
SECOND LEG HOLE ARRANGEMENT STYLE |
ONE HOLE |
| AHLN |
SECOND LEG HOLE DIAMETER |
0.125 INCHES MAXIMUM |
| AKAU |
FIRST LEG HOLE ARRANGEMENT STYLE |
TWO HOLES |
| AHPX |
SECOND LEG THICKNESS |
0.250 INCHES MINIMUM AND 0.270 INCHES MAXIMUM |
| FEAT |
SPECIAL FEATURES |
ALL HOLES ARE DRILLED THRU FIRST AND SECOND LEG THICKNESS |
| MATT |
MATERIAL |
ALUMINUM ALLOY 2024 |
| ADLK |
FIRST LEG LENGTH |
0.765 INCHES NOMINAL |
| HEAT |
III HEAT TREATMENT |
T-4 SOLUTION HEAT TREATED |
| AJZU |
FIRST LEG STYLE |
SQUARE |
| CSSP |
SECOND LEG RELATIONSHIP TO FIRST LEG |
NOT IDENTICAL |
| AHRA |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.125 INCHES NOMINAL |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-A-200/3 FED SPEC SINGLE MATERIAL RESPONSE |
| SR-5 |
MANUFACTURERS CODE |
19204 |
| SR-5 |
THE MANUFACTURERS DATA |
|
| AHLW |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.125 INCHES NOMINAL |
| AHPW |
FIRST LEG THICKNESS |
0.265 INCHES NOMINAL |
| AHLF |
SECOND LEG WIDTH |
0.600 INCHES MINIMUM AND 0.660 INCHES MAXIMUM |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
MIL-A-8625 MIL SPEC SINGLE TREATMENT RESPONSE |
| AKBU |
SECOND LEG STYLE |
EXTENDED FLAT |
| ACHY |
MOUNTING HOLE TYPE |
COUNTERSUNK |
| AHLK |
FIRST LEG HOLE DIAMETER |
0.124 INCHES MINIMUM AND 0.129 INCHES MAXIMUM |
| AHQX |
FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTH |
0.500 INCHES NOMINAL |
| CSSQ |
FIRST LEG ANGLE |
135.0 DEGREES NOMINAL |
| SR-5 |
DESIGN CONTROL REFERENCE |
11687192 |
| AHQN |
FIRST LEG WIDTH |
0.055 INCHES MINIMUM AND 0.085 INCHES MAXIMUM |
| ADLL |
SECOND LEG LENGTH |
0.875 INCHES NOMINAL |
| STYL |
STYLE DESIGNATOR |
ANGLE |
| AHRB |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.150 INCHES NOMINAL |
