| Mfg. Part # | Mfg. Name | CAGE | RNCC | RNVC | ISC | MSDS | SADC | DAC | HCC |
|---|---|---|---|---|---|---|---|---|---|
| 12182-003 | DYNALEC CORPORATION | 12763 | 5 | 2 | 1 | ||||
| 145-4510955-58 | ROHR INC | 51563 | 5 | 2 | 1 | ||||
| 6232-1008 | HONEYWELL INTERNATIONAL INC | 27914 | 5 | 2 | 1 | ||||
| 803-4563091 PC | NAVAL SHIP SYSTEMS COMMAND | 80064 | C | 1 | 1 | N | |||
| 803-4563091 PIE | NAVAL SHIP SYSTEMS COMMAND | 80064 | C | 1 | 1 | N | |||
| 82-2047-0050 | PIERCE MANUFACTURING INC. | 04664 | C | 1 | 1 | A | |||
| AN505C10-8 | AERONAUTICAL STANDARDS GROUP | 88044 | E | 8 | 1 | ||||
| AN505C10R8 | BOSCH REXROTH GMBH LOHMANN | D9182 | C | 1 | 1 | N | |||
| FF-S-92 | FEDERAL SPECIFICATIONS | 81348 | E | 8 | 1 | ||||
| MS35249-70 | MILITARY STANDARDS | 96906 | 5 | 9 | 1 | ||||
| MS51959-63 | MILITARY STANDARDS | 96906 | 5 | 9 | 1 | ||||
| MS51959-63 | NATIONAL AEROSPACE STANDARDS | 80205 | 3 | 2 | 1 | ||||
| MX-261193-3 PIECE 21 | THE BABCOCK & WILCOX COMPANY | 58529 | C | 1 | 1 | N | |||
| NASM51959 | NATIONAL AEROSPACE STANDARDS | 80205 | 5 | 1 | 1 |
| MRC | Requirement Statement | Characteristics |
|---|---|---|
| ABQZ | INTERNAL DRIVE STYLE | CROSS RECESS TYPE 1 |
| AAJD | THREAD CLASS | 2A |
| CRSQ | COUNTERSINK ANGLE | 80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM |
| CYBE | SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE |
| AASL | HEAD DIAMETER | 0.340 INCHES MINIMUM AND 0.385 INCHES MAXIMUM |
| CYBA | SCREW SURFACE TREATMENT | PASSIVATE |
| CQBC | MINIMUM TENSILE STRENGTH | 80000 POUNDS PER SQUARE INCH |
| AASK | HEAD STYLE | FLAT COUNTERSUNK |
| CYAU | SCREW MATERIAL | STEEL COMP 302 OR STEEL COMP 303 OR STEEL COMP 304 OR STEEL COMP 305 OR STEEL COMP 316 |
| THSD | THREAD SERIES DESIGNATOR | UNC |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AHYM | NOMINAL THREAD DIAMETER | 0.190 INCHES |
| CYAW | SCREW MATERIAL DOCUMENT AND CLASSIFICATION | 66 FED STD ALL MATERIAL RESPONSES |
| CMLP | THREAD QUANTITY PER INCH | 24 |
| AASA | THREAD LENGTH | 0.417 INCHES MINIMUM AND 0.500 INCHES MAXIMUM |
| AASB | FASTENER LENGTH | 0.500 INCHES NOMINAL |
