| MRC |
Requirement Statement |
Characteristics |
| AJZU |
FIRST LEG STYLE |
END RADIUS AND TAPERED |
| FEAT |
SPECIAL FEATURES |
SELF-ALIGNING BEARING PRESS FIT AND STAKE INTO ONE LEG |
| AHLP |
SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH |
0.860 INCHES NOMINAL |
| AJFQ |
SECOND LEG END RADIUS |
0.560 INCHES NOMINAL |
| AHPX |
SECOND LEG THICKNESS |
0.200 INCHES NOMINAL |
| AHRB |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.469 INCHES NOMINAL |
| AHQN |
FIRST LEG WIDTH |
1.500 INCHES NOMINAL |
| AHLK |
FIRST LEG HOLE DIAMETER |
0.5615 INCHES MINIMUM AND 0.5625 INCHES MAXIMUM |
| CSSP |
SECOND LEG RELATIONSHIP TO FIRST LEG |
NOT IDENTICAL |
| AHLW |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.187 INCHES NOMINAL |
| CSSQ |
FIRST LEG ANGLE |
100.0 DEGREES NOMINAL |
| SR-5 |
THE MANUFACTURERS DATA |
|
| SFTT |
SURFACE TREATMENT |
CHROMATE |
| AHLT |
SECOND LEG DISTANCE BETWEEN FIRST AND SECOND HOLE CENTERS ALONG WIDTH |
0.640 INCHES NOMINAL |
| AHLF |
SECOND LEG WIDTH |
1.500 INCHES NOMINAL |
| ADLK |
FIRST LEG LENGTH |
1.438 INCHES NOMINAL |
| SR-5 |
MANUFACTURERS CODE |
26512 |
| AKBU |
SECOND LEG STYLE |
END RADIUS |
| AHLU |
SECOND LEG DISTANCE BETWEEN SECOND AND THIRD HOLE CENTERS ALONG WIDTH |
0.220 INCHES NOMINAL |
| SR-5 |
DESIGN CONTROL REFERENCE |
123BM50002-2 |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
MIL-C-5541 MIL SPEC SINGLE TREATMENT RESPONSE |
| ADLL |
SECOND LEG LENGTH |
1.921 INCHES NOMINAL |
| AHRA |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.469 INCHES NOMINAL |
| MATT |
MATERIAL |
ALUMINUM ALLOY |
| AJFP |
FIRST LEG END RADIUS |
0.469 INCHES NOMINAL |
| AHLY |
SECOND LEG DISTANCE BETWEEN SECOND AND THIRD HOLE CENTERS ALONG LENGTH |
0.421 INCHES NOMINAL |
| AHLX |
SECOND LEG DISTANCE BETWEEN FIRST AND SECOND HOLE CENTERS ALONG LENGTH |
0.640 INCHES NOMINAL |
| AHLV |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.540 INCHES NOMINAL |
| AHLN |
SECOND LEG HOLE DIAMETER |
0.127 INCHES MINIMUM AND 0.133 INCHES MAXIMUM |
| AHPW |
FIRST LEG THICKNESS |
0.218 INCHES NOMINAL |
| STYL |
STYLE DESIGNATOR |
ANGLE |
| AKCU |
SECOND LEG HOLE ARRANGEMENT STYLE |
FOUR HOLES |
| AKAU |
FIRST LEG HOLE ARRANGEMENT STYLE |
ONE HOLE |
