| MRC |
Requirement Statement |
Characteristics |
| ABHP |
(NON-CORE DATA) OVERALL LENGTH |
0.295 INCHES MINIMUM AND 0.305 INCHES MAXIMUM |
| ABKW |
(NON-CORE DATA) OVERALL HEIGHT |
0.110 INCHES MINIMUM AND 0.120 INCHES MAXIMUM |
| CQBQ |
CAPACITANCE VALUE PER SECTION |
5.600 PICOFARADS SINGLE SECTION |
| ADAT |
BODY WIDTH |
0.190 INCHES MINIMUM AND 0.210 INCHES MAXIMUM |
| CQJJ |
NONDERATED OPERATING TEMP |
-55.0 DEG CELSIUS MINIMUM AND 125.0 DEG CELSIUS MAXIMUM |
| CRTP |
TOLERANCE RANGE PER SECTION |
-0.25 TO 0.25 PICOFARADS SINGLE SECTION |
| CQWM |
NONDERATED CONTINUOUS VOLTAGE RATING AND TYPE PER SECTION |
300.0 DC SINGLE SECTION |
| CWPM |
DISSIPATION FACTOR AT REFERENCE TEMP IN PERCENT |
0.005 |
| AARG |
RELIABILITY INDICATOR |
NOT ESTABLISHED |
| TTQY |
TERMINAL TYPE AND QUANTITY |
2 UNINSULATED WIRE LEAD |
| ADAU |
BODY HEIGHT |
0.110 INCHES MINIMUM AND 0.120 INCHES MAXIMUM |
| CWJK |
CASE MATERIAL |
PLASTIC |
| ABMK |
(NON-CORE DATA) OVERALL WIDTH |
0.190 INCHES MINIMUM AND 0.210 INCHES MAXIMUM |
| ABJT |
TERMINAL LENGTH |
1.250 INCHES MINIMUM |
| CQBF |
III INSULATION RESISTANCE AT MAXIMUM OPERATING TEMP |
10000.0 MEGOHMS |
| AEBT |
TERMINAL DIAMETER |
0.020 INCHES NOMINAL |
| AEBP |
CENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO LENGTH |
0.180 INCHES MINIMUM AND 0.220 INCHES MAXIMUM |
| AEBZ |
SCHEMATIC DIAGRAM DESIGNATOR |
NO COMMON OR GROUNDED ELECTRODE(S) |
| CWSG |
III TERMINAL SURFACE TREATMENT |
SOLDER |
| CQLZ |
TEMP COEFFICIENT OF CAPACITANCE PER SECTION IN PPM PER DEG CELSIUS |
140.0 SINGLE SECTION |
| AAQL |
BODY STYLE |
W/O MTG FACILITIES TERMINAL(S) ON ONE SURFACE |
| CWPK |
INSULATION RESISTANCE AT REFERENCE TEMP |
100000.0 MEGOHMS |
| CRHD |
TOLERANCE OF TEMP COEFFICIENT PER SECTION IN PPM PER DEG CELSIUS |
-25.0 TO 25.0 SINGLE SECTION |
| ADAQ |
BODY LENGTH |
0.295 INCHES MINIMUM AND 0.305 INCHES MAXIMUM |
