| MRC |
Requirement Statement |
Characteristics |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
66 FED STD ALL MATERIAL RESPONSES OR SAE ASSN STD ALL MATERIAL RESPONSES OR AISI ASSN STD ALL MATERIAL RESPONSES INNER RACE 66 FED STD ALL MATERIAL RESPONSES OR SAE ASSN STD ALL MATERIAL RESPONSES OR AISI ASSN STD ALL MATERIAL RESPONSES OUTER RACE 66 FED STD ALL MATERIAL RESPONSES OR SAE ASSN STD ALL MATERIAL RESPONSES OR AISI ASSN STD ALL MATERIAL RESPONSES ROLLER MIL-M-20693 MIL SPEC SINGLE MATERIAL RESPONSE SEAL MIL-B-5687,TY 2,COMP A1 MIL SPEC SINGLE MATERIAL RESPONSE SLEEVE 66 FED STD ALL MATERIAL RESPONSES OR SAE ASSN STD ALL MATERIAL RESPONSES OR AISI ASSN STD ALL MATERIAL RESPONSES STUD |
| AAJD |
THREAD CLASS |
2A |
| ADZG |
LUBRICATION MATERIAL |
GREASE |
| LMDC |
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION |
MIL-G-23827 MIL SPEC SINGLE MATERIAL RESPONSE |
| STYL |
STYLE DESIGNATOR |
CAM FOLLOWER |
| CMLP |
THREAD QUANTITY PER INCH |
20 |
| THSD |
THREAD SERIES DESIGNATOR |
UNF |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND |
| AGRJ |
STUD DIAMETER |
0.4375 INCHES NOMINAL |
| AASA |
THREAD LENGTH |
0.5000 INCHES NOMINAL |
| AGVT |
OUTER RING WIDTH |
0.6200 INCHES MINIMUM AND 0.6250 INCHES MAXIMUM |
| SFTT |
SURFACE TREATMENT |
CADMIUM OR CADMIUM AND CHROMATE EXPOSED SURFACES AS MOUNTED |
| MATT |
MATERIAL |
STEEL COMP E52100 OR STEEL COMP E50100 INNER RACE STEEL COMP E52100 OR STEEL COMP E50100 OUTER RACE STEEL COMP E52100 OR STEEL COMP E50100 ROLLER PLASTIC POLYHEXAMETHYLENE AMIDE OR PLASTIC POLYCAPROLACTAM SEAL IRON ALLOY SLEEVE STEEL COMP E52100 OR STEEL COMP E50100 STUD |
| ABHP |
OVERALL LENGTH |
1.6260 INCHES MINIMUM AND 1.6980 INCHES MAXIMUM |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
QQ-P-416,TY 1,CL 2 FED SPEC 1ST TREATMENT RESPONSE OR QQ-P-416,TY 1,CL 3 FED SPEC 2ND TREATMENT RESPONSE EXPOSED SURFACES AS MOUNTED |
| AGYW |
BEARING SEAL TYPE |
CONTACT |
| AGXF |
STUD LENGTH |
0.9840 INCHES MINIMUM AND 1.0310 INCHES MAXIMUM |
| CQJX |
NOMINAL THREAD SIZE |
0.438 INCHES |
| AGYJ |
SEAL QUANTITY |
2 |
| FEAT |
SPECIAL FEATURES |
ECCENTRIC BUSHING 0.6240IN. DIA MIN 0.6260 IN. DIA MAX BY 0.5000 IN.LG LOCATED 0.5000 IN.FROM END OF STUD 0.0300 IN.MIN 0.0330 IN. MAX ABOVE CENTER |
| ADGA |
OVERALL OUTSIDE DIAMETER |
1.1245 INCHES MINIMUM AND 1.1280 INCHES MAXIMUM |
