| MRC |
Requirement Statement |
Characteristics |
| AAZG |
HEAD MAJOR DIAMETER |
0.463 INCHES MINIMUM AND 0.507 INCHES MAXIMUM |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
MIL-S-6758 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-5626 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 3RD MATERIAL RESPONSE BOLT MIL-S-6758 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-5626 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 3RD MATERIAL RESPONSE NUT ASTM A582 ASSN STD 1ST MATERIAL RESPONSE OR AMS 5641 ASSN STD 1ST MATERIAL RESPONSE OR QQ-S-763 FED SPEC 2ND MATERIAL RESPONSE OR AMS 5639 ASSN STD 2ND MATERIAL RESPONSE SLEEVE |
| MATT |
MATERIAL |
STEEL COMP 4130 OR STEEL COMP 4140 OR STEEL COMP 8740 BOLT STEEL COMP 4130 OR STEEL COMP 4140 OR STEEL COMP 8740 NUT STEEL COMP 303 OR STEEL COMP 304 SLEEVE |
| AASK |
HEAD STYLE |
FLUSH (FLAT) COUNTERSUNK (INCLUDED ANGLE - LESS THAN 135 DEG W OR W/O CHAMFER) |
| ANEE |
GRIP LENGTH |
0.720 INCHES MINIMUM AND 0.781 INCHES MAXIMUM |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
QQ-P-416 TY 2 CL 3 FED SPEC SINGLE TREATMENT RESPONSE BOLT QQ-P-416 TY 2 CL 3 FED SPEC SINGLE TREATMENT RESPONSE NUT QQ-P-35 FED SPEC 1ST TREATMENT RESPONSE AND QQ-P-416 TY 1 CL 3 FED SPEC 2ND TREATMENT RESPONSE SLEEVE |
| AAZE |
SHANK DIAMETER |
0.258 INCHES MINIMUM AND 0.260 INCHES MAXIMUM |
| ABAF |
EXPANSION DEVICE |
SERRATED STEM-TYPE W |
| CQFM |
HARDNESS RATING |
39.0 ROCKWELL C MINIMUM AND 43.0 ROCKWELL C MAXIMUM BOLT 39.0 ROCKWELL C MINIMUM AND 43.0 ROCKWELL C MAXIMUM NUT |
| CRSQ |
COUNTERSINK ANGLE |
99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| SFTT |
SURFACE TREATMENT |
CADMIUM AND CHROMATE BOLT CADMIUM AND CHROMATE NUT PASSIVATE AND CADMIUM SLEEVE |
| AASB |
FASTENER LENGTH |
0.866 INCHES MINIMUM AND 0.896 INCHES MAXIMUM |
| AAZF |
SHANK STYLE |
THREADED SELF-PLUGGING SHANK W/SLEEVE |
| ZZZK |
SPECIFICATION/STANDARD DATA |
80205-NAS1672 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
