| MRC |
Requirement Statement |
Characteristics |
| AFQW |
MATING END QUANTITY |
2 |
| AAQL |
BODY STYLE |
STRAIGHT SHAPE W/FLANGE |
| ABHP |
OVERALL LENGTH |
1.325 INCHES MINIMUM AND 1.336 INCHES MAXIMUM |
| AFRE |
CONTACT MAXIMUM DC VOLTAGE RATING IN VOLTS |
700.0 ALL MATING ENDS ALL CONTACT GROUPINGS |
| AFRP |
INSERT POSITION IN DEG |
142.0 |
| CSWM |
SHELL SURFACE TREATMENT |
CADMIUM AND CHROMATE |
| ADZC |
ENVIRONMENTAL PROTECTION |
PRESSURE PROOF |
| ABKW |
OVERALL HEIGHT |
1.546 INCHES MINIMUM AND 1.578 INCHES MAXIMUM |
| CSPT |
SHELL MATERIAL |
ALUMINUM ALLOY |
| AFQX |
CONTACT POSITION ARRANGEMENT STYLE |
22-55 ALL MATING ENDS |
| CXCG |
INCLUDED CONTACT QUANTITY |
55 1ST MATING END ALL CONTACT GROUPINGS 55 2ND MATING END ALL CONTACT GROUPINGS |
| AFQZ |
CONTACT REMOVABILITY |
NONREMOVABLE ALL MATING ENDS ALL CONTACT GROUPINGS |
| AFRC |
CONTACT MAXIMUM CURRENT RATING IN AMPS |
7.5 ALL MATING ENDS ALL CONTACT GROUPINGS |
| PMWT |
III PRECIOUS MATERIAL AND WEIGHT |
0.110 GOLD GRAINS, TROY AND 0.110 SILVER GRAINS, TROY |
| CQZG |
INSERT MATERIAL |
RUBBER ALL MATING ENDS |
| CTKL |
INSERT MATERIAL DOCUMENT AND CLASSIFICATION |
MIL-R-3065 MIL SPEC SINGLE MATERIAL RESPONSE ALL MATING ENDS |
| AFRV |
CONNECTOR LOCKING METHOD |
BAYONET PIN |
| PMLC |
III PRECIOUS MATERIAL AND LOCATION |
CONTACT SURFACES GOLD AND CONTACT SURFACES SILVER |
| CQTZ |
CONTACT MATERIAL |
COPPER ALLOY ALL MATING ENDS ALL CONTACT GROUPINGS |
| AEHA |
DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH |
1.2475 INCHES MINIMUM AND 1.2525 INCHES MAXIMUM |
| AFQK |
DISTANCE FROM MOUNTING SHOULDER TO FRONT FACE |
0.688 INCHES MINIMUM AND 0.698 INCHES MAXIMUM |
| ABMK |
OVERALL WIDTH |
1.546 INCHES MINIMUM AND 1.578 INCHES MAXIMUM |
| CQYH |
CONTACT SURFACE TREATMENT |
GOLD AND SILVER ALL MATING ENDS ALL CONTACT GROUPINGS |
| AEBV |
UNTHREADED MOUNTING HOLE DIAMETER |
0.115 INCHES MINIMUM AND 0.125 INCHES MAXIMUM |
| AFRD |
CONTACT MAXIMUM AC VOLTAGE RATING IN VOLTS |
500.0 ALL MATING ENDS ALL CONTACT GROUPINGS |
| CXCL |
INCLUDED CONTACT TYPE |
ROUND PIN 1ST MATING END ALL CONTACT GROUPINGS ROUND SOCKET 2ND MATING END ALL CONTACT GROUPINGS |
| AFRT |
SHELL TYPE |
SOLID |
| AEBW |
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO HEIGHT |
1.2475 INCHES MINIMUM AND 1.2525 INCHES MAXIMUM |
| PRMT |
III PRECIOUS MATERIAL |
GOLD AND SILVER |
| AFRN |
POLARIZATION METHOD |
KEYWAY OR MULTIPLE KEYWAY |
