| MRC |
Requirement Statement |
Characteristics |
| AAUB |
HOLE DIAMETER |
0.170 INCHES MINIMUM AND 0.175 INCHES MAXIMUM |
| ADVJ |
BOLT HOLE CENTERLINE TO NEAREST EDGE DISTANCE |
0.250 INCHES NOMINAL |
| SR-5 |
DESIGN CONTROL REFERENCE |
532R616H01 |
| ADUZ |
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH |
0.520 INCHES NOMINAL |
| SR-5 |
THE MANUFACTURERS DATA |
|
| AECS |
BOLT HOLE QUANTITY |
2 |
| SFTT |
SURFACE TREATMENT |
CHROMATE |
| ADVE |
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH |
0.240 INCHES NOMINAL |
| MATT |
MATERIAL |
ALUMINUM ALLOY 6061 |
| ABHP |
OVERALL LENGTH |
1.000 INCHES NOMINAL |
| FEAT |
SPECIAL FEATURES |
HAS TWO THICKNESSES,ONE-HALF OF THE LENGTH HAS A THICKNESS OF 0.250 IN. AND THE OTHER IS 0.080 IN.. THE HOLE IN THE THICKER SECTION HAS A COUNTERSINK,100.0 DEG PORM 5.0 DEG TO A DIA OF 0.225 IN. ON THE FLAT SIDE |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
MIL-C-5541 MIL SPEC SINGLE TREATMENT RESPONSE |
| SR-5 |
MANUFACTURERS CODE |
97942 |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-A-225/8 FED SPEC SINGLE MATERIAL RESPONSE |
| STYL |
STYLE DESIGNATOR |
NON-CIRCULAR W/SQUARE CORNERS |
| ABMK |
OVERALL WIDTH |
0.500 INCHES NOMINAL |
