| MRC |
Requirement Statement |
Characteristics |
| BZRR |
THREAD SERIES |
UNF |
| ADER |
MOUNTING STYLE |
BRACKET MTD W/THREE MTG HOLES, TOP HOLE THREADED |
| ADZC |
ENVIRONMENTAL PROTECTION |
CORROSION RESISTANT |
| BCGS |
SHAFT DRIVE END STYLE |
SPLINED SHAFT END, THREADED |
| AAUJ |
SPLINE MAJOR DIAMETER |
0.874 INCHES NOMINAL |
| AAUH |
SPLINE MINOR DIAMETER |
ANY ACCEPTABLE |
| BCGG |
MINIMUM CURRENT CUT-IN SPEED IN RPM |
880 |
| BCMD |
DISTANCE BETWEEN INSIDE SURFACES OF HINGE BRACKET |
7.243 INCHES MINIMUM AND 7.257 INCHES MAXIMUM |
| SR-5 |
MANUFACTURERS CODE |
16764 |
| ACJC |
MOUNTING HOLE THREAD DIRECTION |
RIGHT-HAND |
| BCGT |
III COTTER PIN HOLE |
INCLUDED |
| ELEC |
VOLTAGE IN VOLTS |
12.0 |
| CMLK |
MOUNTING HOLE THREAD SERIES DESIGNATOR |
UNC |
| BCLZ |
DISTANCE BETWEEN SHAFT CENTER AND TOP MOUNTING HOLE CENTER |
3.500 INCHES NOMINAL |
| BCND |
MAXIMUM RATED ARMATURE SPEED IN RPM |
1800 |
| AXFH |
SPLINE LENGTH |
1.938 INCHES NOMINAL |
| AKAE |
MAXIMUM OPERATING ALTITUDE RATING |
NOT RATED |
| BCMH |
BOTTOM MOUNTING HOLE DIAMETER |
0.328 INCHES MINIMUM AND 0.453 INCHES MAXIMUM |
| BCLY |
DISTANCE BETWEEN SHAFT CENTER AND BOTTOM MOUNTING HOLE CENTER |
3.875 INCHES NOMINAL |
| CMLN |
MOUNTING HOLE THREAD CLASS |
2B |
| BCMF |
DISTANCE BETWEEN OUTSIDE SURFACES OF HINGE BRACKET |
8.181 INCHES MINIMUM AND 8.195 INCHES MAXIMUM |
| SR-5 |
THE MANUFACTURERS DATA |
|
| SR-5 |
DESIGN CONTROL REFERENCE |
1105906 |
| AHZV |
SUBMERSIBILITY |
NONSUBMERSIBLE |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND |
| AASA |
THREAD LENGTH |
0.906 INCHES NOMINAL |
| BCMC |
ANGULAR DEVIATION OF SECOND HOLE FROM FIRST HOLE IN DEG |
201.0 |
| CMLL |
MOUNTING HOLE THREAD DIAMETER |
0.438 INCHES NOMINAL |
| BCMB |
ANGULAR DEVIATION OF FIRST HOLE FROM TOP CENTER IN DEG |
8.0 |
| AAUK |
SPLINE WIDTH |
0.216 INCHES MINIMUM AND 0.217 INCHES MAXIMUM |
| BCGN |
GROUNDING METHOD |
INTERNAL |
| AKCT |
SHAFT ROTATION DIRECTION |
CLOCKWISE |
| CMLP |
THREAD QUANTITY PER INCH |
18 |
| CMLM |
MOUNTING HOLE THREAD QUANTITY PER INCH |
14 |
| AWDP |
THREAD DIAMETER |
0.625 INCHES NOMINAL |
| BCGF |
MAXIMUM OUTPUT CURRENT RATING IN AMPS |
26.0 |
| BCGD |
ARMATURE MINIMUM SPEED IN RPM AT FULL CURRENT OUTPUT |
1500 |
| CFHL |
THREAD CLASS |
2A |
| ABSA |
SPLINE QUANTITY |
6 |
