| MRC |
Requirement Statement |
Characteristics |
| CPRJ |
TRIP RELEASE METHOD |
MAGNETIC ALL LOCATIONS |
| CQXF |
INCLOSURE PROTECTION TYPE FOR WHICH DESIGNED |
HERMETICALLY SEALED AND SHOCK RESISTANT AND VIBRATION RESISTANT |
| CQJX |
NOMINAL THREAD SIZE |
0.375 INCHES |
| CPLM |
MAXIMUM CONTINUOUS LOAD CURRENT RATING PER POLE |
3.0 AMPERES DC ALL LOCATIONS |
| ABXD |
BUSHING LENGTH |
0.380 INCHES MAXIMUM |
| AAQL |
BODY STYLE |
MULTIPOLE-SINGLE ACTUATOR TYPE |
| AEBQ |
CENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO WIDTH |
0.610 INCHES MINIMUM AND 0.640 INCHES MAXIMUM |
| TTQY |
TERMINAL TYPE AND QUANTITY |
6 WIRE HOOK AND 6 TAB, SOLDER LUG |
| ADTV |
CASE MATERIAL |
METAL |
| APNQ |
III ARC QUENCHING METHOD |
MAGNETIC BLOWOUT |
| CPRW |
ACTUATOR FUNCTION |
TRIP-RESET |
| CPRX |
ACTUATOR POSITION DESIGNATION |
AT POLE TWO |
| CPRT |
MANUAL ACTUATOR TYPE AND QUANTITY |
1 TOGGLE |
| THSD |
THREAD SERIES DESIGNATOR |
UNEF |
| AJWX |
MOUNTING SURFACE TO TERMINAL END DISTANCE |
1.780 INCHES MAXIMUM |
| CPRL |
TRIP RELEASE CHARACTERISTIC |
TIME DELAY ALL LOCATIONS |
| CPRQ |
RESET METHOD |
MANUAL |
| AXHR |
MOUNTING FACILITY TYPE AND QUANTITY |
1 THREADED BUSHING W/PANEL SEAL |
| AAJE |
THREAD PITCH DIAMETERS |
0.3503 TO 0.3537 INCHES |
| AEFS |
III NONTURN DEVICE DIAMETER |
0.235 INCHES MINIMUM AND 0.265 INCHES MAXIMUM |
| CPSM |
INTERNAL TRIP RELEASE CONFIGURATION |
RELAY TRIP ALL LOCATIONS |
| BBRJ |
III SPECIAL HANDLING FEATURE |
MAGNETIC |
| AFJN |
III FRAGILITY FACTOR |
MODERATELY RUGGED |
| ADAQ |
BODY LENGTH |
1.562 INCHES MAXIMUM |
| ADAT |
BODY WIDTH |
1.937 INCHES MAXIMUM |
| CPRR |
MAIN CONTACT TRIPPING MECHANISM TYPE |
TRIP FREE |
| AEFP |
III NONTURN DEVICE RADIUS |
0.610 INCHES MINIMUM AND 0.640 INCHES MAXIMUM |
| CMLP |
THREAD QUANTITY PER INCH |
32 |
| AEFN |
III NONTURN DEVICE LOCATION |
AT 3 OCLOCK AND AT 9 OCLOCK |
| BBRG |
III STORAGE TYPE |
GENERAL PURPOSE WAREHOUSE |
| CPRG |
MAXIMUM INTERRUPTING CAPACITY CURRENT TYPE AND RATING PER POLE IN AMPS |
1000.0 DC ALL LOCATIONS |
| CPRN |
ULTIMATE TRIP RATING OF CONTINUOUS CURRENT RATING PER POLE IN PERCENT |
115.0 ALL LOCATIONS |
| AEBP |
CENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO LENGTH |
0.860 INCHES MINIMUM AND 0.890 INCHES MAXIMUM |
| PKWT |
III UNPACKAGED UNIT WEIGHT |
5.400 OUNCES |
| CQWN |
TRIP DELAY TIME IN SECONDS PER RATED CONTINUOUS CURRENT |
0.600 MINIMUM AT 200 PCT AND 6.000 MAXIMUM AT 200 PCT ALL LOCATIONS |
| AKPX |
POLE QUANTITY |
3 |
| CPRF |
OPERATING VOLTAGE TYPE AND RATING PER POLE IN VOLTS |
50.0 DC ALL LOCATIONS |
| CPRH |
CIRCUIT PROTECTION TYPE |
OVERCURRENT ALL LOCATIONS |
