| MRC |
Requirement Statement |
Characteristics |
| ABPA |
UNDERCUT DIAMETER |
0.281 INCHES MINIMUM AND 0.285 INCHES MAXIMUM |
| STYL |
STYLE DESIGNATOR |
GROOVE |
| ABNZ |
EFFECTIVE LENGTH |
2.314 INCHES NOMINAL |
| ABPD |
SECOND UNDERCUT WIDTH |
0.028 INCHES MINIMUM AND 0.036 INCHES MAXIMUM |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-S-689 FED SPEC SINGLE MATERIAL RESPONSE OR AN-QQ-S-690 FED SPEC SINGLE MATERIAL RESPONSE OVERALL |
| MATT |
MATERIAL |
STEEL OVERALL |
| SR-5 |
THE MANUFACTURERS DATA |
|
| FEAT |
SPECIAL FEATURES |
0.125 IN. DIA CENTER DRILLED BOTH ENDS |
| ABHP |
OVERALL LENGTH |
2.428 INCHES MINIMUM AND 2.448 INCHES MAXIMUM |
| SR-5 |
DESIGN CONTROL REFERENCE |
405391 |
| CQBB |
SECOND END RELATIONSHIP WITH FIRST END |
IDENTICAL |
| SR-5 |
MANUFACTURERS CODE |
59364 |
| AAGZ |
FIRST END STYLE |
CHAMFERED |
| AMCS |
FIRST END TAPER LENGTH |
0.006 INCHES MINIMUM AND 0.026 INCHES MAXIMUM |
| ABMZ |
DIAMETER |
0.3040 INCHES MINIMUM AND 0.3050 INCHES MAXIMUM |
| CSYM |
SURFACE FINISH |
12.0 MICROINCHES SHANK END |
| CRMG |
FIRST END TAPER ANGLE |
44.5 DEGREES MINIMUM AND 45.5 DEGREES MAXIMUM |
| SFTT |
SURFACE TREATMENT |
ZINC OVERALL |
| CRDY |
FIRST END LOCATION |
BOTH ENDS |
| ABPC |
UNDERCUT WIDTH |
0.028 INCHES MINIMUM AND 0.036 INCHES MAXIMUM |
