| MRC |
Requirement Statement |
Characteristics |
| ZZZT |
NONDEFINITIVE SPEC/STD DATA |
3 TYPE AND 3C STYLE |
| CYBE |
SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
QQ-P-416,TYPE 2,CLASS 3 FED SPEC SINGLE TREATMENT RESPONSE |
| FEAT |
SPECIAL FEATURES |
MATERIAL,ST1016,ST1017,ST1018,ST1019,ST1020,ST1022,ST1137 DOC. AND CLASS. FED STD 66,ST0015,FED STD 66,B1122,ST0016,FED STD 66,B1123 |
| ABQZ |
INTERNAL DRIVE STYLE |
CROSS RECESS TYPE 1 |
| AAJD |
THREAD CLASS |
2A |
| CYAU |
SCREW MATERIAL |
STEEL COMP 1010 OR STEEL COMP 1015 OR STEEL COMP 1016 OR STEEL COMP 1018 OR STEEL COMP 1019 OR STEEL COMP 1020 OR STEEL COMP 1022 OR STEEL COMP 1025 OR STEEL COMP 1026 OR STEEL COMP 1035 OR STEEL COMP 1040 OR STEEL COMP 1042 OR STEEL COMP 1045 OR STEEL COMP 1046 OR STEEL COMP 1548 OR STEEL COMP 1049 OR STEEL COMP 1050 OR STEEL OR STEEL COMP 1010 OR STEEL COMP 1011 OR STEEL COMP 1013 OR STEEL COMP 1015 |
| SR-1 |
SPEC/STD CONTROLLING DATA |
|
| CYAW |
SCREW MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-S-634 FED SPEC 1ST MATERIAL RESPONSE OR QQ-S-634 FED SPEC 2ND MATERIAL RESPONSE OR QQ-S-634 FED SPEC 3RD MATERIAL RESPONSE OR QQ-S-634 FED SPEC 4TH MATERIAL RESPONSE OR QQ-S-634 FED SPEC 5TH MATERIAL RESPONSE OR QQ-S-634 FED SPEC 6TH MATERIAL RESPONSE OR QQ-S-634 FED SPEC 7TH MATERIAL RESPONSE OR QQ-S-634 FED SPEC 8TH MATERIAL RESPONSE OR QQ-S-634 FED SPEC 9TH MATERIAL RESPONSE OR QQ-S-634 FED SPEC 10TH MATERIAL RESPONSE OR QQ-S-634 FED SPEC 11TH MATERIAL RESPONSE OR QQ-S-634 FED SPEC 12TH MATERIAL RESPONSE OR QQ-S-634 FED SPEC 13TH MATERIAL RESPONSE OR QQ-S-634 FED SPEC 14TH MATERIAL RESPONSE OR QQ-S-634 FED SPEC 15TH MATERIAL RESPONSE OR QQ-S-634 FED SPEC 16TH MATERIAL RESPONSE OR QQ-S-637 FED SPEC 17TH MATERIAL RESPONSE OR 66 FED STD 18TH MATERIAL RESPONSE OR 66 FED STD 19TH MATERIAL RESPONSE OR 66 FED STD 20TH MATERIAL RESPONSE OR 66 FED STD 21ST MATERIAL RESPONSE OR 66 FED STD 22ND MATERIAL RESPONSE |
| AASK |
HEAD STYLE |
FLAT COUNTERSUNK |
| THSD |
THREAD SERIES DESIGNATOR |
UNF |
| CRSQ |
COUNTERSINK ANGLE |
99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| SR-1 |
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE |
AN507-1032R14 |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND |
| AASL |
HEAD DIAMETER |
0.359 INCHES MINIMUM AND 0.385 INCHES MAXIMUM |
| AHYM |
NOMINAL THREAD DIAMETER |
0.190 INCHES |
| SR-1 |
MANUFACTURERS CODE |
88044 |
| CMLP |
THREAD QUANTITY PER INCH |
32 |
| CYBA |
SCREW SURFACE TREATMENT |
CADMIUM |
| CQBC |
MINIMUM TENSILE STRENGTH |
60000 POUNDS PER SQUARE INCH |
| AASA |
THREAD LENGTH |
0.875 INCHES MINIMUM |
| AASB |
FASTENER LENGTH |
0.875 INCHES NOMINAL |
