| MRC |
Requirement Statement |
Characteristics |
| ADUY |
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH |
1.276 INCHES MINIMUM AND 1.284 INCHES MAXIMUM |
| ADUZ |
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH |
1.302 INCHES MINIMUM AND 1.304 INCHES MAXIMUM |
| ABHP |
OVERALL LENGTH |
3.000 INCHES NOMINAL |
| SFTT |
SURFACE TREATMENT |
RHODIUM |
| AAUB |
HOLE DIAMETER |
0.170 INCHES MINIMUM AND 0.173 INCHES MAXIMUM |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-B-613,1/2H FED SPEC SINGLE MATERIAL RESPONSE |
| ADUE |
APERTURE WIDTH |
0.304 INCHES MINIMUM AND 0.401 INCHES MAXIMUM |
| ADPW |
OUTSIDE CORNER RADIUS |
0.063 INCHES NOMINAL |
| SR-5 |
MANUFACTURERS CODE |
18876 |
| ZZZV |
III FSC APPLICATION DATA |
TEST SET GUIDED MISSILE |
| PRMT |
III PRECIOUS MATERIAL |
RHODIUM |
| SR-5 |
THE MANUFACTURERS DATA |
|
| ADVE |
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH |
0.1705 INCHES NOMINAL |
| SR-5 |
DESIGN CONTROL REFERENCE |
9065852 |
| ADVD |
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG WIDTH |
0.191 INCHES NOMINAL |
| ADUF |
APERTURE LENGTH |
0.899 INCHES MINIMUM AND 0.901 INCHES MAXIMUM |
| MATT |
MATERIAL |
COPPER ALLOY 268 |
| ABMK |
OVERALL WIDTH |
1.625 INCHES NOMINAL |
| ADPQ |
INSIDE CORNER RADIUS |
0.031 INCHES NOMINAL |
| PMLC |
III PRECIOUS MATERIAL AND LOCATION |
OVERALL SURFACE RHODIUM |
| AECS |
BOLT HOLE QUANTITY |
6 |
