| MRC |
Requirement Statement |
Characteristics |
| AKCU |
SECOND LEG HOLE ARRANGEMENT STYLE |
ONE HOLE |
| AHPW |
FIRST LEG THICKNESS |
0.073 INCHES MINIMUM AND 0.087 INCHES MAXIMUM |
| ADLL |
SECOND LEG LENGTH |
1.938 INCHES MINIMUM AND 1.978 INCHES MAXIMUM |
| SR-5 |
MANUFACTURERS CODE |
07482 |
| MATT |
MATERIAL |
STEEL COMP 321 |
| AHRB |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.320 INCHES MINIMUM AND 0.340 INCHES MAXIMUM |
| AHLN |
SECOND LEG HOLE DIAMETER |
0.321 INCHES MINIMUM AND 0.322 INCHES MAXIMUM |
| AHLV |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.320 INCHES MINIMUM AND 0.340 INCHES MAXIMUM |
| SR-5 |
THE MANUFACTURERS DATA |
|
| AHLW |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.320 INCHES MINIMUM AND 0.340 INCHES MAXIMUM |
| ADLK |
FIRST LEG LENGTH |
0.810 INCHES MINIMUM AND 0.830 INCHES MAXIMUM |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
AMS 5510 ASSN STD SINGLE MATERIAL RESPONSE |
| AKBU |
SECOND LEG STYLE |
END RADIUS AND TAPERED |
| AJFQ |
SECOND LEG END RADIUS |
0.320 INCHES MINIMUM AND 0.340 INCHES MAXIMUM |
| CSSQ |
FIRST LEG ANGLE |
90.0 DEGREES NOMINAL |
| AHPX |
SECOND LEG THICKNESS |
0.073 INCHES MINIMUM AND 0.087 INCHES MAXIMUM |
| SR-5 |
DESIGN CONTROL REFERENCE |
9658M37P14 |
| STYL |
STYLE DESIGNATOR |
ANGLE |
