| MRC |
Requirement Statement |
Characteristics |
| AASB |
FASTENER LENGTH |
0.281 INCHES MINIMUM AND 0.312 INCHES MAXIMUM |
| ABQZ |
INTERNAL DRIVE STYLE |
CROSS RECESS TYPE 1 |
| AAJD |
THREAD CLASS |
2A |
| AHYM |
NOMINAL THREAD DIAMETER |
0.164 INCHES |
| CTJJ |
PRIMARY WASHER MATERIAL THICKNESS |
0.018 INCHES MINIMUM AND 0.023 INCHES MAXIMUM |
| MATT |
MATERIAL |
STEEL COMP 1050 OR STEEL COMP 1551 OR STEEL COMP 1552 OR STEEL COMP 1053 OR STEEL COMP 1054 OR STEEL COMP 1055 OR STEEL COMP 1059 OR STEEL COMP 1060 OR STEEL COMP 1561 OR STEEL COMP 1566 PRIMARY WASHER STEEL COMP 1010 OR STEEL COMP 1011 OR STEEL COMP 1013 OR STEEL COMP 1015 OR STEEL COMP 1016 OR STEEL COMP 1017 OR STEEL COMP 1018 OR STEEL COMP 1019 OR STEEL COMP 1020 FASTENER |
| AAVW |
WASHER QUANTITY |
1 |
| CTHW |
PRIMARY WASHER STYLE |
FLAT EXTERNAL TEETH |
| AASK |
HEAD STYLE |
ROUND |
| CQFM |
HARDNESS RATING |
40.0 ROCKWELL C MINIMUM AND 50.0 ROCKWELL C MAXIMUM PRIMARY WASHER |
| CSPG |
PRIMARY WASHER OUTSIDE DIAMETER |
0.305 INCHES MINIMUM AND 0.320 INCHES MAXIMUM |
| THSD |
THREAD SERIES DESIGNATOR |
UNC |
| AASA |
THREAD LENGTH |
0.196 INCHES MINIMUM AND 0.294 INCHES MAXIMUM |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND |
| SFTT |
SURFACE TREATMENT |
CADMIUM OR ZINC OVERALL |
| AASL |
HEAD DIAMETER |
0.287 INCHES MINIMUM AND 0.309 INCHES MAXIMUM |
| CMLP |
THREAD QUANTITY PER INCH |
32 |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
QQ-P-416,TY 1,CL 3 FED SPEC 1ST TREATMENT RESPONSE OR QQ-Z-325,TY 1,CL 3 FED SPEC 2ND TREATMENT RESPONSE OVERALL |
| AASU |
HEAD HEIGHT |
0.107 INCHES MINIMUM AND 0.120 INCHES MAXIMUM |
