| MRC |
Requirement Statement |
Characteristics |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-A-430 FED SPEC SINGLE MATERIAL RESPONSE SLEEVE AMS 6322 ASSN STD SINGLE MATERIAL RESPONSE STEM |
| AGAV |
III END ITEM IDENTIFICATION |
HELICOPTER OBSERVATION (AHIP), OH-58D; AIRCRAFT, B-2 BOMBER (ATB); AIRCRAFT, AC-130H, MC-130H, EC-130E, HC-130; AIRCRAFT, PHANTOM F-4; AIRCRAFT, AIRLIFTER C-17A; SUPPORT EQUIPMENT, B-1 AIRCRAFT; AIRCRAFT MH-47E; SUPPORT EQUIPMENT (SE), B-2 BOMBER; F/A-18E/F HORNET AIRCRAFT; MISSLE, VEHICLE MOUNTER STINGER (AVENGER) |
| AASK |
HEAD STYLE |
FLUSH (FLAT) COUNTERSUNK (INCLUDED ANGLE - LESS THAN 135 DEG W OR W/O CHAMFER) |
| SFTT |
SURFACE TREATMENT |
CHROMATE SLEEVE CADMIUM AND CHROMATE STEM |
| FEAT |
SPECIAL FEATURES |
"NS" LETTERS AFTER THE MATERIAL CODE "B" INDICATE NO PREFERENCE TO LOCK TYPE (MAY BE VISIBLE OR INTERNAL). RIVETS WITH NO LETTER CODE (INDICATING VISIBLE LOCK TYPE) AND RIVETS WITH THE LETTER "H" AFTER THE MATERIAL CODE (INDICATING INTERNAL LOCK TYPE) ARE BOTH ACCEPTABLE FOR THIS ITEM OF SUPPLY. |
| ABAF |
EXPANSION DEVICE |
SERRATED STEM-TYPE W |
| CRSQ |
COUNTERSINK ANGLE |
99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| AAZE |
SHANK DIAMETER |
0.125 INCHES MINIMUM AND 0.129 INCHES MAXIMUM |
| AAZG |
HEAD MAJOR DIAMETER |
0.229 INCHES MAXIMUM |
| AAZF |
SHANK STYLE |
SELF-PLUGGING MECHANICALLY LOCKED STEM |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
MIL-C-5541 MIL SPEC SINGLE TREATMENT RESPONSE SLEEVE QQ-P-416,TYPE 2,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE STEM |
| MATT |
MATERIAL |
ALUMINUM ALLOY 5056 SLEEVE STEEL COMP 8740 STEM |
| ANEE |
GRIP LENGTH |
0.376 INCHES MINIMUM AND 0.437 INCHES MAXIMUM |
| AASB |
FASTENER LENGTH |
0.527 INCHES MINIMUM AND 0.547 INCHES MAXIMUM |
