| MRC |
Requirement Statement |
Characteristics |
| CSYM |
III SURFACE FINISH |
63.0 MICROINCHES SHANK |
| SR-1 |
SPEC/STD CONTROLLING DATA |
|
| AAJE |
THREAD PITCH DIAMETERS |
0.2248 TO 0.2263 INCHES STUD THREAD |
| THSD |
THREAD SERIES DESIGNATOR |
UNF NUT THREAD UNC STUD THREAD |
| CQFM |
III HARDNESS RATING |
26.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM |
| MATT |
MATERIAL |
STEEL COMP 8740 |
| AASA |
THREAD LENGTH |
0.552 INCHES MINIMUM AND 0.572 INCHES MAXIMUM NUT THREAD 0.678 INCHES MINIMUM AND 0.698 INCHES MAXIMUM STUD THREAD |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND NUT THREAD RIGHT-HAND STUD THREAD |
| SR-1 |
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE |
AN128449 |
| ADDU |
III DISTANCE FROM COTTER PIN HOLE CENTERLINE TO NUT END |
0.110 INCHES NOMINAL FIRST HOLE |
| ABHP |
OVERALL LENGTH |
1.802 INCHES MINIMUM AND 1.822 INCHES MAXIMUM |
| SFTT |
SURFACE TREATMENT |
CADMIUM OVERALL |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
AMS 6322 ASSN STD SINGLE MATERIAL RESPONSE |
| CMLP |
THREAD QUANTITY PER INCH |
28 NUT THREAD 20 STUD THREAD |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
AMS 2400 ASSN STD SINGLE TREATMENT RESPONSE OVERALL |
| SR-1 |
MANUFACTURERS CODE |
88044 |
| ADDV |
III COTTER PIN HOLE DIAMETER |
0.065 INCHES MINIMUM AND 0.072 INCHES MAXIMUM FIRST HOLE |
| CQJX |
NOMINAL THREAD SIZE |
0.250 INCHES NUT THREAD 0.250 INCHES STUD THREAD |
