| MRC |
Requirement Statement |
Characteristics |
| ZZZK |
SPECIFICATION/STANDARD DATA |
81349-MIL-S-20708/81 GOVERNMENT SPECIFICATION |
| CWBH |
SHAFT NOMINAL THREAD SIZE |
0.190 INCHES SINGLE SHAFT |
| CSJY |
TRANSFORMATION RATIO |
1.154 ROTOR TO STATOR NOMINAL |
| AKAF |
SHAFT THREAD DIRECTION |
RIGHT-HAND SINGLE SHAFT |
| ABPC |
UNDERCUT WIDTH |
0.0620 INCHES NOMINAL |
| AJVW |
ALIGNMENT HOLE QUANTITY |
4 |
| TTQY |
TERMINAL TYPE AND QUANTITY |
6 SCREW |
| CQWQ |
SHAFT THREAD LENGTH |
0.2000 INCHES NOMINAL SINGLE SHAFT |
| ABWV |
SHAFT DIAMETER |
0.1872 INCHES NOMINAL SINGLE SHAFT |
| CTCW |
ALIGNMENT HOLE BOLT CIRCLE DIAMETER |
0.8120 INCHES NOMINAL |
| AKAN |
SHAFT THREAD CLASS |
2A SINGLE SHAFT |
| SR-1 |
SPEC/STD CONTROLLING DATA |
|
| AJSS |
FREQUENCY IN HERTZ |
400.0 NOMINAL |
| AJSP |
STATOR INPUT CURRENT RATING |
49.0 MILLIAMPERES MAXIMUM |
| AJWR |
SHOULDER LENGTH |
0.0620 INCHES NOMINAL |
| AJSN |
STATOR INPUT VOLTAGE RATING IN VOLTS |
90.0 NOMINAL |
| AJVF |
PHASE SHIFT ANGLE IN DEG |
4.000 INPUT TO OUTPUT NOMINAL |
| AJVL |
ELECTRICAL ERROR ANGULAR RANGE IN MINUTES |
-7.0 TO 7.0 |
| AJSQ |
STATOR INPUT ELECTRICAL POWER RATING |
530.0 MILLIWATTS NOMINAL |
| AJTM |
ZRS IMPEDANCE ANGLE IN DEG |
23.00 MINIMUM AND 33.00 MAXIMUM |
| AJVT |
ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS |
0.07 INCH-OUNCES MAXIMUM |
| AJSL |
BODY SIZE |
11 |
| AFJN |
III FRAGILITY FACTOR |
MODERATELY RUGGED |
| AJYY |
SHAFT THREAD SERIES DESIGNATOR |
UNF SINGLE SHAFT |
| AAFZ |
BODY MATERIAL |
STEEL, CORROSION RESISTING |
| AJVH |
MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT |
90.00 |
| SR-1 |
MANUFACTURERS CODE |
81349 |
| AJVG |
MAXIMUM FUNDAMENTAL NULL VOLTAGE IN MILLIVOLTS PER VOLT |
60.00 OUTPUT |
| AJVM |
SPLINE TOOTH QUANTITY |
21 SINGLE SHAFT |
| ABKK |
FLANGE DIAMETER |
1.0570 INCHES MINIMUM AND 1.0620 INCHES MAXIMUM |
| AJTK |
ZSO IMPEDANCE ANGLE IN DEG |
79.00 MINIMUM AND 85.00 MAXIMUM |
| ABHP |
OVERALL LENGTH |
2.4060 INCHES NOMINAL |
| CQTM |
TERMINAL LOCATION |
REAR |
| AJWQ |
PILOT LENGTH |
0.0620 INCHES NOMINAL |
| AJWX |
MOUNTING SURFACE TO TERMINAL END DISTANCE |
1.8510 INCHES NOMINAL |
| SR-1 |
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE |
M20708/81-01B |
| AJTJ |
ZSO IMPEDANCE MAGNITUDE IN OHMS |
1590.00 MINIMUM AND 2050.00 MAXIMUM |
| AJTL |
ZRS IMPEDANCE MAGNITUDE IN OHMS |
470.00 MINIMUM AND 570.00 MAXIMUM |
| ABKU |
FLANGE THICKNESS |
0.0930 INCHES NOMINAL |
| AHCG |
MAXIMUM TEMP RISE |
20.0 DEG CELSIUS |
| ABPA |
UNDERCUT DIAMETER |
0.9750 INCHES NOMINAL |
| AAQL |
BODY STYLE |
STANDARD ROUND C |
| AAVH |
SHOULDER DIAMETER |
0.9995 INCHES MINIMUM AND 1.0000 INCHES MAXIMUM |
| CRSY |
ALIGNMENT HOLE DEPTH |
0.1250 INCHES NOMINAL |
| AAVL |
PILOT DIAMETER |
0.6245 INCHES MINIMUM AND 0.6250 INCHES MAXIMUM |
| ABXF |
SHAFT LENGTH |
0.5550 INCHES NOMINAL SINGLE SHAFT |
| CRSJ |
SHAFT TYPE |
SPLINE W/THREADS SINGLE SHAFT |
| AJXA |
SPLINE TOOTH DIAMETRAL PITCH |
120 SINGLE SHAFT |
