| MRC |
Requirement Statement |
Characteristics |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
QQ-P-416 TY 2 CL 2 FED SPEC SINGLE TREATMENT RESPONSE BOLT QQ-P-416 TY 2 CL 2 FED SPEC SINGLE TREATMENT RESPONSE NUT QQ-P-35 FED SPEC 1ST TREATMENT RESPONSE AND QQ-P-416 TY 1 CL 3 FED SPEC 2ND TREATMENT RESPONSE SLEEVE |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
MIL-S-5626 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-6758 MIL SPEC 3RD MATERIAL RESPONSE BOLT MIL-S-5626 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-6758 MIL SPEC 3RD MATERIAL RESPONSE NUT ASTM A582 ASSN STD 1ST MATERIAL RESPONSE OR QQ-S-763 FED SPEC 2ND MATERIAL RESPONSE OR AMS 5639 ASSN STD 2ND MATERIAL RESPONSE OR AMS 5641 ASSN STD 3RD MATERIAL RESPONSE SLEEVE |
| AASK |
HEAD STYLE |
FLUSH (FLAT) COUNTERSUNK (INCLUDED ANGLE - LESS THAN 135 DEG W OR W/O CHAMFER) |
| CQFM |
HARDNESS RATING |
39.0 ROCKWELL C MINIMUM AND 43.0 ROCKWELL C MAXIMUM BOLT 39.0 ROCKWELL C MINIMUM AND 43.0 ROCKWELL C MAXIMUM NUT |
| CRSQ |
COUNTERSINK ANGLE |
99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| ZZZK |
SPECIFICATION/STANDARD DATA |
80205-NAS1750 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
| SFTT |
SURFACE TREATMENT |
CADMIUM AND CHROMATE BOLT CADMIUM AND CHROMATE NUT PASSIVATE AND CADMIUM SLEEVE |
| MATT |
MATERIAL |
STEEL COMP 4140 OR STEEL COMP 8740 OR STEEL COMP 4130 BOLT STEEL COMP 4140 OR STEEL COMP 8740 OR STEEL COMP 4130 NUT STEEL COMP 303 OR STEEL COMP 304 OR STEEL COMP 303F SLEEVE |
| FEAT |
SPECIAL FEATURES |
SELF-LOCKING |
| AAZF |
SHANK STYLE |
THREADED SELF-PLUGGING SHANK W/SLEEVE |
| ABAF |
EXPANSION DEVICE |
THREADED STEM |
| ANEE |
GRIP LENGTH |
0.157 INCHES MINIMUM AND 0.219 INCHES MAXIMUM |
| AAZE |
SHANK DIAMETER |
0.213 INCHES MINIMUM AND 0.215 INCHES MAXIMUM |
| AAZG |
HEAD MAJOR DIAMETER |
0.342 INCHES MINIMUM AND 0.385 INCHES MAXIMUM |
