| MRC |
Requirement Statement |
Characteristics |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
AMS 6487 ASSN STD SINGLE MATERIAL RESPONSE BOLT AMS 6487 ASSN STD SINGLE MATERIAL RESPONSE NUT AMS 5667 ASSN STD SINGLE MATERIAL RESPONSE OR AMS 5582 ASSN STD SINGLE MATERIAL RESPONSE SLEEVE |
| ABAJ |
LUBRICATION |
GREASE FILM |
| SR-5 |
DESIGN CONTROL REFERENCE |
BAV10A12F |
| AASK |
HEAD STYLE |
FLUSH (FLAT) COUNTERSUNK (INCLUDED ANGLE - LESS THAN 135 DEG W OR W/O CHAMFER) |
| AAZE |
SHANK DIAMETER |
0.325 INCHES MINIMUM AND 0.327 INCHES MAXIMUM |
| ANEE |
GRIP LENGTH |
0.720 INCHES MINIMUM AND 0.781 INCHES MAXIMUM |
| AASB |
FASTENER LENGTH |
0.906 INCHES NOMINAL |
| SR-5 |
THE MANUFACTURERS DATA |
|
| CRSQ |
COUNTERSINK ANGLE |
99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| MATT |
MATERIAL |
STEEL COMP H11 BOLT STEEL COMP H11 NUT NICKEL ALLOY X-750 SLEEVE |
| CQFM |
HARDNESS RATING |
48.0 ROCKWELL C MINIMUM AND 53.0 ROCKWELL C MAXIMUM BOLT 48.0 ROCKWELL C MINIMUM AND 53.0 ROCKWELL C MAXIMUM NUT |
| AAZG |
HEAD MAJOR DIAMETER |
0.626 INCHES MINIMUM AND 0.635 INCHES MAXIMUM |
| SFTT |
SURFACE TREATMENT |
CADMIUM AND CHROMATE BOLT CADMIUM AND CHROMATE NUT CADMIUM SLEEVE |
| ABAF |
EXPANSION DEVICE |
THREADED MANDREL |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
NAS 672 ASSN STD 1ST TREATMENT RESPONSE AND QQ-P-416 FED SPEC 2ND TREATMENT RESPONSE BOLT NAS 672 ASSN STD 1ST TREATMENT RESPONSE AND QQ-P-416 FED SPEC 2ND TREATMENT RESPONSE NUT QQ-P-416 TY 1 CL 3 FED SPEC SINGLE TREATMENT RESPONSE SLEEVE |
| SR-5 |
MANUFACTURERS CODE |
92215 |
| FEAT |
SPECIAL FEATURES |
COLOR NUT BLUE |
| AAZF |
SHANK STYLE |
THREADED SELF-PLUGGING SHANK W/SLEEVE |
