| MRC |
Requirement Statement |
Characteristics |
| ZZZK |
SPECIFICATION/STANDARD DATA |
80205-NAS1674 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
MIL-S-5626 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-6758 MIL SPEC 3RD MATERIAL RESPONSE BOLT QQ-A-225/9 FED SPEC SINGLE MATERIAL RESPONSE NUT QQ-S-763 FED SPEC 1ST MATERIAL RESPONSE OR AMS 5639 ASSN STD 1ST MATERIAL RESPONSE OR ASTM A582 ASSN STD 2ND MATERIAL RESPONSE OR AMS 5641 ASSN STD 3RD MATERIAL RESPONSE SLEEVE |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
QQ-P-416,TY 2,CL 2 FED SPEC SINGLE TREATMENT RESPONSE BOLT MIL-A-8625,TY 2 MIL SPEC SINGLE TREATMENT RESPONSE NUT QQ-P-416,TY 2,CL 2 FED SPEC 1ST TREATMENT RESPONSE AND QQ-P-35 FED SPEC 2ND TREATMENT RESPONSE SLEEVE |
| MATT |
MATERIAL |
STEEL COMP 4140 OR STEEL COMP 8740 OR STEEL COMP 4130 BOLT ALUMINUM ALLOY 7075 NUT STEEL COMP 304 OR STEEL COMP 303 OR STEEL COMP 303F SLEEVE |
| CQSX |
SHEAR STRENGTH |
3100 DOUBLE POUNDS PER SQUARE INCH |
| CQFM |
HARDNESS RATING |
39.0 ROCKWELL C MINIMUM AND 43.0 ROCKWELL C MAXIMUM BOLT |
| AAZE |
SHANK DIAMETER |
0.197 INCHES MINIMUM AND 0.199 INCHES MAXIMUM |
| AASU |
HEAD HEIGHT |
0.072 INCHES MINIMUM AND 0.079 INCHES MAXIMUM |
| ANEE |
GRIP LENGTH |
0.907 INCHES MINIMUM AND 0.969 INCHES MAXIMUM |
| SFTT |
SURFACE TREATMENT |
CADMIUM AND CHROMATE BOLT ANODIZE NUT CADMIUM AND CHROMATE AND PASSIVATE SLEEVE |
| ASDB |
WIDTH ACROSS FLATS |
0.332 INCHES MINIMUM AND 0.346 INCHES MAXIMUM |
| AASK |
HEAD STYLE |
HEXAGON COUNTERSUNK |
| CRSQ |
COUNTERSINK ANGLE |
100.0 DEGREES NOMINAL |
| AAZF |
SHANK STYLE |
THREADED SELF-PLUGGING SHANK W/SLEEVE |
| ABAF |
EXPANSION DEVICE |
THREADED STEM |
