| MRC |
Requirement Statement |
Characteristics |
| CRHN |
SHAFT SLOT WIDTH |
0.0250 INCHES NOMINAL SINGLE SHAFT |
| AJSL |
BODY SIZE |
8 |
| ABKK |
FLANGE DIAMETER |
0.7450 INCHES MINIMUM AND 0.7530 INCHES MAXIMUM |
| ABHP |
OVERALL LENGTH |
1.7420 INCHES MINIMUM AND 1.7660 INCHES MAXIMUM |
| ABPC |
UNDERCUT WIDTH |
0.0620 INCHES NOMINAL |
| AJVF |
PHASE SHIFT ANGLE IN DEG |
18.000 INPUT TO OUTPUT NOMINAL |
| AJST |
ROTOR INPUT CURRENT RATING |
56.0 MILLIAMPERES MAXIMUM |
| AAFZ |
BODY MATERIAL |
STEEL, STAINLESS |
| AHCG |
MAXIMUM TEMP RISE |
3.0 DEG CELSIUS |
| AJSS |
FREQUENCY IN HERTZ |
400.0 NOMINAL |
| CSJY |
TRANSFORMATION RATIO |
1.000 ROTOR TO STATOR NOMINAL |
| AJVH |
MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT |
60.00 |
| AJSR |
ROTOR INPUT VOLTAGE RATING IN VOLTS |
26.0 NOMINAL |
| AJVL |
ELECTRICAL ERROR ANGULAR RANGE IN MINUTES |
-10.0 TO 10.0 |
| AJTK |
ZSO IMPEDANCE ANGLE IN DEG |
73.50 NOMINAL |
| AJVS |
ACTUATOR FRICTION TORQUE AT MINUS 55 DEG CELSIUS |
16.0 CENTIMETER-GRAMS NOMINAL |
| AJWX |
MOUNTING SURFACE TO TERMINAL END DISTANCE |
1.2810 INCHES NOMINAL |
| CQZS |
SHAFT SLOT DEPTH |
0.0300 INCHES NOMINAL SINGLE SHAFT |
| AAVL |
PILOT DIAMETER |
0.4995 INCHES MINIMUM AND 0.5000 INCHES MAXIMUM |
| AJTH |
ZRO IMPEDANCE ANGLE IN DEG |
69.00 NOMINAL |
| ABXF |
SHAFT LENGTH |
0.4610 INCHES MINIMUM AND 0.4850 INCHES MAXIMUM SINGLE SHAFT |
| CQTM |
TERMINAL LOCATION |
REAR |
| CRSJ |
SHAFT TYPE |
ROUND, SLOTTED SINGLE SHAFT |
| AJTG |
ZRO IMPEDANCE MAGNITUDE IN OHMS |
520.00 NOMINAL |
| AJVT |
ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS |
4.0 CENTIMETER-GRAMS NOMINAL |
| AJTT |
STATOR DC RESISTANCE IN OHMS |
145.00 NOMINAL |
| AJVG |
MAXIMUM FUNDAMENTAL NULL VOLTAGE IN MILLIVOLTS PER VOLT |
38.00 OUTPUT |
| ABKU |
FLANGE THICKNESS |
0.0620 INCHES NOMINAL |
| ABWV |
SHAFT DIAMETER |
0.1195 INCHES MINIMUM AND 0.1200 INCHES MAXIMUM SINGLE SHAFT |
| AAQL |
BODY STYLE |
STANDARD ROUND A |
| AJSV |
ROTOR INPUT ELECTRICAL POWER RATING |
47.0 MILLIWATTS NOMINAL |
| AJTJ |
ZSO IMPEDANCE MAGNITUDE IN OHMS |
665.00 NOMINAL |
| AJWQ |
PILOT LENGTH |
0.0400 INCHES NOMINAL |
| AJTS |
ROTOR DC RESISTANCE IN OHMS |
145.00 NOMINAL |
| ABPA |
UNDERCUT DIAMETER |
0.6870 INCHES NOMINAL |
| TTQY |
TERMINAL TYPE AND QUANTITY |
7 WIRE LEAD |
