| MRC |
Requirement Statement |
Characteristics |
| AJSP |
STATOR INPUT CURRENT RATING |
145.0 MILLIAMPERES NOMINAL |
| AJSL |
BODY SIZE |
8 |
| AJTL |
ZRS IMPEDANCE MAGNITUDE IN OHMS |
55.00 NOMINAL |
| ABKK |
FLANGE DIAMETER |
0.7450 INCHES MINIMUM AND 0.7530 INCHES MAXIMUM |
| ABPC |
UNDERCUT WIDTH |
0.0620 INCHES NOMINAL |
| AJSQ |
STATOR INPUT ELECTRICAL POWER RATING |
456.0 MILLIWATTS NOMINAL |
| SR-5 |
MANUFACTURERS CODE |
06481 |
| CRHN |
SHAFT SLOT WIDTH |
0.0200 INCHES NOMINAL SINGLE SHAFT |
| AJTM |
ZRS IMPEDANCE ANGLE IN DEG |
18.00 NOMINAL |
| AJTK |
ZSO IMPEDANCE ANGLE IN DEG |
73.00 NOMINAL |
| AJSS |
FREQUENCY IN HERTZ |
400.0 NOMINAL |
| AJVS |
ACTUATOR FRICTION TORQUE AT MINUS 55 DEG CELSIUS |
16.0 CENTIMETER-GRAMS NOMINAL |
| AJSN |
STATOR INPUT VOLTAGE RATING IN VOLTS |
11.8 NOMINAL |
| TTQY |
TERMINAL TYPE AND QUANTITY |
6 WIRE LEAD |
| AJVF |
PHASE SHIFT ANGLE IN DEG |
16.800 INPUT TO OUTPUT NOMINAL |
| CQZS |
SHAFT SLOT DEPTH |
0.0300 INCHES NOMINAL SINGLE SHAFT |
| AAVL |
PILOT DIAMETER |
0.4995 INCHES MINIMUM AND 0.5000 INCHES MAXIMUM |
| SR-5 |
THE MANUFACTURERS DATA |
|
| AJTH |
ZRO IMPEDANCE ANGLE IN DEG |
68.50 NOMINAL |
| AJVL |
ELECTRICAL ERROR ANGULAR RANGE IN MINUTES |
-15.0 TO 15.0 |
| AJWX |
MOUNTING SURFACE TO TERMINAL END DISTANCE |
1.3000 INCHES NOMINAL |
| AJVH |
MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT |
26.00 |
| AFJN |
III FRAGILITY FACTOR |
MODERATELY RUGGED |
| AJTJ |
ZSO IMPEDANCE MAGNITUDE IN OHMS |
79.00 NOMINAL |
| ABXF |
SHAFT LENGTH |
0.4210 INCHES MINIMUM AND 0.4450 INCHES MAXIMUM SINGLE SHAFT |
| AJTG |
ZRO IMPEDANCE MAGNITUDE IN OHMS |
110.00 NOMINAL |
| CQTM |
TERMINAL LOCATION |
REAR |
| CRSJ |
SHAFT TYPE |
ROUND, SLOTTED SINGLE SHAFT |
| AJVG |
MAXIMUM FUNDAMENTAL NULL VOLTAGE IN MILLIVOLTS PER VOLT |
17.00 OUTPUT |
| ABKU |
FLANGE THICKNESS |
0.0590 INCHES MINIMUM AND 0.0650 INCHES MAXIMUM |
| AAQL |
BODY STYLE |
STANDARD ROUND A |
| AJVT |
ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS |
16.0 CENTIMETER-GRAMS NOMINAL |
| AAFZ |
BODY MATERIAL |
ANY ACCEPTABLE |
| ABWV |
SHAFT DIAMETER |
0.4995 INCHES MINIMUM AND 0.5000 INCHES MAXIMUM SINGLE SHAFT |
| AJWQ |
PILOT LENGTH |
0.0400 INCHES NOMINAL |
| ABHP |
OVERALL LENGTH |
1.7610 INCHES MINIMUM AND 1.7850 INCHES MAXIMUM |
| ABPA |
UNDERCUT DIAMETER |
0.6870 INCHES NOMINAL |
| SR-5 |
DESIGN CONTROL REFERENCE |
900141-25 |
