| MRC |
Requirement Statement |
Characteristics |
| TEST |
TEST DATA DOCUMENT |
19207-CPR103899 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
| CQFM |
III HARDNESS RATING |
30.0 ROCKWELL C MINIMUM AND 35.0 ROCKWELL C MAXIMUM |
| AAVK |
SHOULDER LENGTH |
0.250 INCHES NOMINAL |
| ADDD |
UNTHREADED END DIAMETER |
0.868 INCHES NOMINAL |
| AAJD |
THREAD CLASS |
2A NUT THREAD |
| THSD |
THREAD SERIES DESIGNATOR |
UNF NUT THREAD |
| CMLP |
THREAD QUANTITY PER INCH |
20 NUT THREAD |
| FEAT |
SPECIAL FEATURES |
2.250 IN. TAPER PER FOOT ON DIA. ON NUT END,STARTS O.220 IN. FROM SHOULDFR AND ENDS 1.470 IN. FROM SHOULDER |
| SR-5 |
THE MANUFACTURERS DATA |
|
| SR-5 |
MANUFACTURERS CODE |
19207 |
| CBBL |
FEATURES PROVIDED |
CASEHARDENED |
| ADDF |
LENGTH EXCLUDING FLUXED WELDING TIP |
3.850 INCHES NOMINAL |
| ADDE |
UNTHREADED END LENGTH |
1.250 INCHES NOMINAL |
| CSYM |
III SURFACE FINISH |
125.0 MICROINCHES OVERALL |
| STYL |
STYLE DESIGNATOR |
WELDING |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND NUT THREAD |
| AAVH |
SHOULDER DIAMETER |
1.380 INCHES NOMINAL |
| SR-5 |
DESIGN CONTROL REFERENCE |
CPR103899 |
| MATT |
MATERIAL |
STEEL COMP 4130 OR STEEL COMP 8630 |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
Q-S-624 FED SPEC 13TH MATERIAL RESPONSE |
| CQJX |
NOMINAL THREAD SIZE |
0.500 INCHES NUT THREAD |
| AASA |
THREAD LENGTH |
0.082 INCHES NOMINAL NUT THREAD |
