| MRC |
Requirement Statement |
Characteristics |
| CSJY |
TRANSFORMATION RATIO |
0.735 ROTOR TO STATOR NOMINAL |
| ABKK |
FLANGE DIAMETER |
1.4320 INCHES MINIMUM AND 1.4370 INCHES MAXIMUM |
| AJVG |
MAXIMUM FUNDAMENTAL NULL VOLTAGE IN MILLIVOLTS PER VOLT |
45.00 OUTPUT |
| AJSQ |
STATOR INPUT ELECTRICAL POWER RATING |
210.0 MILLIWATTS NOMINAL |
| AJVS |
ACTUATOR FRICTION TORQUE AT MINUS 55 DEG CELSIUS |
0.05 INCH-OUNCES MAXIMUM |
| CRHN |
SHAFT SLOT WIDTH |
0.0200 INCHES NOMINAL SINGLE SHAFT |
| AJSP |
STATOR INPUT CURRENT RATING |
13.0 MILLIAMPERES NOMINAL |
| AHCG |
MAXIMUM TEMP RISE |
10.0 DEG CELSIUS |
| AJTA |
ZRS RESISTANCE IN OHMS |
1300.00 MINIMUM AND 1650.00 MAXIMUM |
| SR-1 |
SPEC/STD CONTROLLING DATA |
|
| AAFZ |
BODY MATERIAL |
STEEL, STAINLESS |
| AJTJ |
ZSO IMPEDANCE MAGNITUDE IN OHMS |
78.00 MINIMUM AND 82.00 MAXIMUM |
| AJVH |
MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT |
65.00 |
| AJVL |
ELECTRICAL ERROR ANGULAR RANGE IN MINUTES |
-6.0 TO 6.0 |
| CQZS |
SHAFT SLOT DEPTH |
0.0250 INCHES NOMINAL SINGLE SHAFT |
| AJSN |
STATOR INPUT VOLTAGE RATING IN VOLTS |
90.0 NOMINAL |
| AJSS |
FREQUENCY IN HERTZ |
60.0 NOMINAL |
| AJWX |
MOUNTING SURFACE TO TERMINAL END DISTANCE |
2.3910 INCHES MAXIMUM |
| AJVT |
ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS |
0.05 INCH-OUNCES MAXIMUM |
| ABXF |
SHAFT LENGTH |
0.5450 INCHES MINIMUM AND 0.5650 INCHES MAXIMUM SINGLE SHAFT |
| AFJN |
III FRAGILITY FACTOR |
MODERATELY RUGGED |
| AJSY |
ZSO RESISTANCE IN OHMS |
6000.00 MINIMUM AND 7500.00 MAXIMUM |
| TTQY |
TERMINAL TYPE AND QUANTITY |
5 SCREW |
| AJSL |
BODY SIZE |
15 |
| ABHP |
OVERALL LENGTH |
3.0430 INCHES MINIMUM AND 3.0830 INCHES MAXIMUM |
| SR-1 |
MANUFACTURERS CODE |
81349 |
| AJWR |
SHOULDER LENGTH |
0.1320 INCHES NOMINAL |
| CQTM |
TERMINAL LOCATION |
REAR |
| CRSJ |
SHAFT TYPE |
ROUND, SLOTTED SINGLE SHAFT |
| ABWV |
SHAFT DIAMETER |
0.1867 INCHES MINIMUM AND 0.1872 INCHES MAXIMUM SINGLE SHAFT |
| AJVF |
PHASE SHIFT ANGLE IN DEG |
9.000 INPUT TO OUTPUT NOMINAL |
| AJTL |
ZRS IMPEDANCE MAGNITUDE IN OHMS |
13.00 MINIMUM AND 18.00 MAXIMUM |
| ABKU |
FLANGE THICKNESS |
0.0930 INCHES NOMINAL |
| ZZZK |
SPECIFICATION/STANDARD DATA |
81349-MIL-S-20708/21 GOVERNMENT SPECIFICATION |
| SR-1 |
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE |
M20708/21-02D |
| AAVL |
PILOT DIAMETER |
0.8745 INCHES MINIMUM AND 0.8750 INCHES MAXIMUM |
| AAQL |
BODY STYLE |
STANDARD ROUND B |
| AAVH |
SHOULDER DIAMETER |
1.3115 INCHES MINIMUM AND 1.3120 INCHES MAXIMUM |
| AJWQ |
PILOT LENGTH |
0.0400 INCHES NOMINAL |
| CRSY |
ALIGNMENT HOLE DEPTH |
0.1250 INCHES NOMINAL |
| ABPC |
UNDERCUT WIDTH |
0.0780 INCHES NOMINAL |
| CTCW |
ALIGNMENT HOLE BOLT CIRCLE DIAMETER |
1.0970 INCHES MINIMUM AND 1.1030 INCHES MAXIMUM |
