| MRC |
Requirement Statement |
Characteristics |
| AEBP |
CENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO LENGTH |
0.125 INCHES NOMINAL |
| CWQC |
EQUIVALENT SERIES RESISTANCE AT REFERENCE TEMP IN OHMS |
2.00 |
| AECE |
III ANODE TYPE |
SOLID |
| ADAU |
BODY HEIGHT |
0.105 INCHES NOMINAL |
| CWNJ |
CAPACITIVE ELECTRODE MATERIAL |
TANTALUM |
| CRTP |
TOLERANCE RANGE PER SECTION |
-10.00 TO 10.00 PERCENT SINGLE SECTION |
| CQLH |
III DC LEAKAGE AT MAXIMUM OPERATING TEMP |
50.0 MILLIAMPERES |
| ADAQ |
BODY LENGTH |
0.345 INCHES NOMINAL |
| ABKW |
(NON-CORE DATA) OVERALL HEIGHT |
0.105 INCHES NOMINAL |
| CWQH |
DC LEAKAGE AT REFERENCE TEMP |
4.000 MICROAMPERES |
| AECN |
III IMPEDANCE AT MINIMUM OPERATING TEMP IN OHMS |
4.0 |
| AARG |
RELIABILITY INDICATOR |
NOT ESTABLISHED |
| ADAT |
BODY WIDTH |
0.230 INCHES NOMINAL |
| TTQY |
TERMINAL TYPE AND QUANTITY |
2 UNINSULATED WIRE LEAD |
| AECQ |
ELECTRICAL POLARIZATION |
POLARIZED |
| CWJK |
CASE MATERIAL |
PLASTIC |
| ABHP |
(NON-CORE DATA) OVERALL LENGTH |
0.345 INCHES NOMINAL |
| ABJT |
TERMINAL LENGTH |
1.700 INCHES NOMINAL |
| CQWM |
NONDERATED CONTINUOUS VOLTAGE RATING AND TYPE PER SECTION |
10.0 DC SINGLE SECTION |
| CQJJ |
NONDERATED OPERATING TEMP |
-55.0 DEG CELSIUS MINIMUM AND 85.0 DEG CELSIUS MAXIMUM |
| AEBZ |
SCHEMATIC DIAGRAM DESIGNATOR |
NO COMMON OR GROUNDED ELECTRODE(S) |
| CQBQ |
CAPACITANCE VALUE PER SECTION |
15.000 MICROFARADS SINGLE SECTION |
| CWPM |
DISSIPATION FACTOR AT REFERENCE TEMP IN PERCENT |
6.0000 |
| AEBT |
TERMINAL DIAMETER |
0.025 INCHES NOMINAL |
| CWSG |
III TERMINAL SURFACE TREATMENT |
SOLDER |
| AAQL |
BODY STYLE |
W/O MTG FACILITIES TERMINAL(S) ON ONE SURFACE |
| AARF |
III MIL-STD-1276 WIRE LEAD TYPE DESIGNATOR |
AN-3 |
| ABMK |
(NON-CORE DATA) OVERALL WIDTH |
0.230 INCHES NOMINAL |
