| MRC |
Requirement Statement |
Characteristics |
| CSJY |
TRANSFORMATION RATIO |
0.735 ROTOR TO STATOR NOMINAL |
| ABPC |
UNDERCUT WIDTH |
0.0620 INCHES NOMINAL |
| AJTK |
ZSO IMPEDANCE ANGLE IN DEG |
77.30 MINIMUM AND 83.50 MAXIMUM |
| AJTJ |
ZSO IMPEDANCE MAGNITUDE IN OHMS |
4350.00 MINIMUM AND 5700.00 MAXIMUM |
| AAVH |
SHOULDER DIAMETER |
0.0995 INCHES MINIMUM AND 1.0000 INCHES MAXIMUM |
| AJVW |
ALIGNMENT HOLE QUANTITY |
4 |
| AJTL |
ZRS IMPEDANCE MAGNITUDE IN OHMS |
585.00 MINIMUM AND 700.00 MAXIMUM |
| AJVF |
PHASE SHIFT ANGLE IN DEG |
5.000 INPUT TO OUTPUT NOMINAL |
| CRHN |
SHAFT SLOT WIDTH |
0.0200 INCHES NOMINAL SINGLE SHAFT |
| CTCW |
ALIGNMENT HOLE BOLT CIRCLE DIAMETER |
0.8120 INCHES NOMINAL |
| AHCG |
MAXIMUM TEMP RISE |
10.0 DEG CELSIUS |
| ABKK |
FLANGE DIAMETER |
1.0615 INCHES MINIMUM AND 1.0620 INCHES MAXIMUM |
| SR-1 |
SPEC/STD CONTROLLING DATA |
|
| AJSS |
FREQUENCY IN HERTZ |
400.0 NOMINAL |
| AJVH |
MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT |
60.00 |
| AJWR |
SHOULDER LENGTH |
0.0620 INCHES NOMINAL |
| AJSP |
STATOR INPUT CURRENT RATING |
18.0 MILLIAMPERES NOMINAL |
| CQZS |
SHAFT SLOT DEPTH |
0.0250 INCHES NOMINAL SINGLE SHAFT |
| AJSN |
STATOR INPUT VOLTAGE RATING IN VOLTS |
90.0 NOMINAL |
| AJVL |
ELECTRICAL ERROR ANGULAR RANGE IN MINUTES |
-7.0 TO 7.0 |
| AJWX |
MOUNTING SURFACE TO TERMINAL END DISTANCE |
1.8010 INCHES MAXIMUM |
| AJTM |
ZRS IMPEDANCE ANGLE IN DEG |
22.00 MINIMUM AND 32.00 MAXIMUM |
| SR-1 |
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE |
M20708/1-02E |
| AJSL |
BODY SIZE |
11 |
| AAFZ |
BODY MATERIAL |
STEEL, CORROSION RESISTING |
| AJVG |
MAXIMUM FUNDAMENTAL NULL VOLTAGE IN MILLIVOLTS PER VOLT |
32.00 OUTPUT |
| SR-1 |
MANUFACTURERS CODE |
81349 |
| CRSY |
ALIGNMENT HOLE DEPTH |
0.1120 INCHES NOMINAL |
| AJSQ |
STATOR INPUT ELECTRICAL POWER RATING |
20.0 WATTS NOMINAL |
| TTQY |
TERMINAL TYPE AND QUANTITY |
5 WIRE LEAD |
| CQTM |
TERMINAL LOCATION |
REAR |
| AJWQ |
PILOT LENGTH |
0.0620 INCHES NOMINAL |
| CRSJ |
SHAFT TYPE |
ROUND, SLOTTED SINGLE SHAFT |
| ABXF |
SHAFT LENGTH |
0.3680 INCHES NOMINAL SINGLE SHAFT |
| ABKU |
FLANGE THICKNESS |
0.0930 INCHES NOMINAL |
| ABWV |
SHAFT DIAMETER |
0.1195 INCHES MINIMUM AND 0.1200 INCHES MAXIMUM SINGLE SHAFT |
| SR-1 |
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE |
MILC20708-1 |
| ABPA |
UNDERCUT DIAMETER |
0.9750 INCHES NOMINAL |
| ABHP |
OVERALL LENGTH |
2.2240 INCHES NOMINAL |
| AAQL |
BODY STYLE |
STANDARD ROUND C |
| AAVL |
PILOT DIAMETER |
0.6245 INCHES MINIMUM AND 0.6250 INCHES MAXIMUM |
