| MRC |
Requirement Statement |
Characteristics |
| CSFG |
PLUS J ZSS REACTANCE IN OHMS |
17.00 MINIMUM AND 24.00 MAXIMUM |
| AJST |
ROTOR INPUT CURRENT RATING |
280.0 MILLIAMPERES MAXIMUM |
| ABPC |
UNDERCUT WIDTH |
0.0620 INCHES NOMINAL |
| AJVW |
ALIGNMENT HOLE QUANTITY |
4 |
| AJSV |
ROTOR INPUT ELECTRICAL POWER RATING |
1.0 WATTS MAXIMUM |
| AJVV |
TORQUE GRADIENT PER ANGULAR DEG |
0.008 INCH-OUNCES MINIMUM |
| ABHP |
OVERALL LENGTH |
2.2710 INCHES MINIMUM AND 2.3050 INCHES MAXIMUM |
| CRHN |
SHAFT SLOT WIDTH |
0.0200 INCHES NOMINAL SINGLE SHAFT |
| SR-1 |
SPEC/STD CONTROLLING DATA |
|
| AAFZ |
BODY MATERIAL |
STEEL, STAINLESS |
| AJSS |
FREQUENCY IN HERTZ |
400.0 NOMINAL |
| AJVS |
ACTUATOR FRICTION TORQUE AT MINUS 55 DEG CELSIUS |
0.07 INCH-OUNCES MAXIMUM |
| AJSR |
ROTOR INPUT VOLTAGE RATING IN VOLTS |
26.0 NOMINAL |
| AJWR |
SHOULDER LENGTH |
0.0620 INCHES NOMINAL |
| CQZS |
SHAFT SLOT DEPTH |
0.0250 INCHES NOMINAL SINGLE SHAFT |
| ABXF |
SHAFT LENGTH |
0.4830 INCHES MINIMUM AND 0.5030 INCHES MAXIMUM SINGLE SHAFT |
| AJVF |
PHASE SHIFT ANGLE IN DEG |
4.000 INPUT TO OUTPUT NOMINAL |
| AJTC |
ZSS RESISTANCE IN OHMS |
3.30 MINIMUM AND 4.20 MAXIMUM |
| AJVL |
ELECTRICAL ERROR ANGULAR RANGE IN MINUTES |
-7.0 TO 7.0 |
| SR-1 |
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE |
MIL-S-20708/6 |
| SR-1 |
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE |
M20708/6-04C |
| ZZZK |
SPECIFICATION/STANDARD DATA |
81349-MIL-S-20708/6 GOVERNMENT SPECIFICATION |
| AJSL |
BODY SIZE |
11 |
| AFJN |
III FRAGILITY FACTOR |
MODERATELY RUGGED |
| ABWV |
SHAFT DIAMETER |
0.1198 INCHES MINIMUM AND 0.1200 INCHES MAXIMUM SINGLE SHAFT |
| SR-1 |
MANUFACTURERS CODE |
81349 |
| CSJY |
TRANSFORMATION RATIO |
0.454 ROTOR TO STATOR NOMINAL |
| ABKK |
FLANGE DIAMETER |
1.0570 INCHES MINIMUM AND 1.0620 INCHES MAXIMUM |
| TTQY |
TERMINAL TYPE AND QUANTITY |
5 WIRE LEAD |
| CQTM |
TERMINAL LOCATION |
REAR |
| AJWQ |
PILOT LENGTH |
0.0620 INCHES NOMINAL |
| CRSJ |
SHAFT TYPE |
ROUND, SLOTTED SINGLE SHAFT |
| ABKU |
FLANGE THICKNESS |
0.0930 INCHES NOMINAL |
| AJWX |
MOUNTING SURFACE TO TERMINAL END DISTANCE |
1.7320 INCHES MINIMUM |
| AHCG |
MAXIMUM TEMP RISE |
20.0 DEG CELSIUS |
| ABPA |
UNDERCUT DIAMETER |
0.9750 INCHES NOMINAL |
| AAQL |
BODY STYLE |
STANDARD ROUND C |
| AAVH |
SHOULDER DIAMETER |
0.9995 INCHES MINIMUM AND 1.0000 INCHES MAXIMUM |
| CTCW |
ALIGNMENT HOLE BOLT CIRCLE DIAMETER |
0.8090 INCHES MINIMUM AND 0.8150 INCHES MAXIMUM |
| CRSY |
ALIGNMENT HOLE DEPTH |
0.1250 INCHES NOMINAL |
| AAVL |
PILOT DIAMETER |
0.6245 INCHES MINIMUM AND 0.6250 INCHES MAXIMUM |
