| MRC |
Requirement Statement |
Characteristics |
| SFTT |
SURFACE TREATMENT |
CADMIUM AND CHROMATE BOLT CADMIUM AND CHROMATE NUT CADMIUM AND CHROMATE AND PASSIVATE SLEEVE |
| AASK |
HEAD STYLE |
FLUSH (FLAT) COUNTERSUNK (INCLUDED ANGLE - LESS THAN 135 DEG W OR W/O CHAMFER) |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
QQ-P-416,TY 2,CL 2 FED SPEC SINGLE TREATMENT RESPONSE BOLT QQ-P-416,TY 2,CL 2 FED SPEC SINGLE TREATMENT RESPONSE NUT QQ-P-416,TY 2,CL 2 FED SPEC 1ST TREATMENT RESPONSE AND QQ-P-35 FED SPEC 2ND TREATMENT RESPONSE SLEEVE |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
MIL-S-5626 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-6758 MIL SPEC 3RD MATERIAL RESPONSE BOLT MIL-S-5626 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-6758 MIL SPEC 3RD MATERIAL RESPONSE NUT QQ-S-763 FED SPEC 1ST MATERIAL RESPONSE OR AMS 5639 ASSN STD 1ST MATERIAL RESPONSE OR AMS 5641 ASSN STD 2ND MATERIAL RESPONSE OR ASTM A582 ASSN STD 3RD MATERIAL RESPONSE SLEEVE |
| CQFM |
HARDNESS RATING |
39.0 ROCKWELL C MINIMUM AND 43.0 ROCKWELL C MAXIMUM BOLT 39.0 ROCKWELL C MINIMUM AND 43.0 ROCKWELL C MAXIMUM NUT |
| CRSQ |
COUNTERSINK ANGLE |
99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| ZZZK |
SPECIFICATION/STANDARD DATA |
80205-NAS1750 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
| ABAF |
EXPANSION DEVICE |
THREADED MANDREL |
| FEAT |
SPECIAL FEATURES |
SELF-LOCKING |
| AAZF |
SHANK STYLE |
THREADED SELF-PLUGGING SHANK W/SLEEVE |
| AAZE |
SHANK DIAMETER |
0.213 INCHES MINIMUM AND 0.215 INCHES MAXIMUM |
| ANEE |
GRIP LENGTH |
0.595 INCHES MINIMUM AND 0.656 INCHES MAXIMUM |
| AAZG |
HEAD MAJOR DIAMETER |
0.342 INCHES MINIMUM AND 0.385 INCHES MAXIMUM |
