| MRC |
Requirement Statement |
Characteristics |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
QQ-P-416 TY 2 CL 2 FED SPEC SINGLE TREATMENT RESPONSE BOLT QQ-P-416 TY 2 CL 2 FED SPEC SINGLE TREATMENT RESPONSE NUT QQ-P-35 FED SPEC 1ST TREATMENT RESPONSE AND QQ-P-416 TY 1 CL 3 FED SPEC 2ND TREATMENT RESPONSE SLEEVE |
| AAZE |
SHANK DIAMETER |
0.274 INCHES MINIMUM AND 0.276 INCHES MAXIMUM |
| AAZG |
HEAD MAJOR DIAMETER |
0.463 INCHES MINIMUM AND 0.507 INCHES MAXIMUM |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
MIL-S-5626 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-6758 MIL SPEC 3RD MATERIAL RESPONSE BOLT MIL-S-5626 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-6758 MIL SPEC 3RD MATERIAL RESPONSE NUT ASTM A582 ASSN STD 1ST MATERIAL RESPONSE OR QQ-S-763 FED SPEC 2ND MATERIAL RESPONSE OR AMS 5639 ASSN STD 2ND MATERIAL RESPONSE OR AMS 5641 ASSN STD 3RD MATERIAL RESPONSE SLEEVE |
| AASK |
HEAD STYLE |
FLUSH (FLAT) COUNTERSUNK (INCLUDED ANGLE - LESS THAN 135 DEG W OR W/O CHAMFER) |
| ANEE |
GRIP LENGTH |
0.345 INCHES MINIMUM AND 0.406 INCHES MAXIMUM |
| CQFM |
HARDNESS RATING |
39.0 ROCKWELL C MINIMUM AND 43.0 ROCKWELL C MAXIMUM BOLT 39.0 ROCKWELL C MINIMUM AND 43.0 ROCKWELL C MAXIMUM NUT |
| ZZZK |
SPECIFICATION/STANDARD DATA |
80205-NAS1750 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
| SFTT |
SURFACE TREATMENT |
CADMIUM AND CHROMATE BOLT CADMIUM AND CHROMATE NUT PASSIVATE AND CADMIUM SLEEVE |
| CRSQ |
COUNTERSINK ANGLE |
100.0 DEGREES NOMINAL |
| MATT |
MATERIAL |
STEEL COMP 4140 OR STEEL COMP 8740 OR STEEL COMP 4130 BOLT STEEL COMP 4140 OR STEEL COMP 8740 OR STEEL COMP 4130 NUT STEEL COMP 303 OR STEEL COMP 304 OR STEEL COMP 303F SLEEVE |
| FEAT |
SPECIAL FEATURES |
SELF-LOCKING |
| AAZF |
SHANK STYLE |
THREADED SELF-PLUGGING SHANK W/SLEEVE |
| ABAF |
EXPANSION DEVICE |
THREADED STEM |
