| MRC |
Requirement Statement |
Characteristics |
| CYAU |
SCREW MATERIAL |
STEEL COMP 8630 |
| ABQZ |
INTERNAL DRIVE STYLE |
CROSS RECESS TYPE 1 |
| FEAT |
SPECIAL FEATURES |
FLEET BALLISTIC MISSILE QUALITY AS IDENTIFIED BY QUALITY CONTROL NO.POSO913030 |
| CYBE |
SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
QQ-P-416 TY 2 CL 3 FED SPEC SINGLE TREATMENT RESPONSE |
| CQFM |
HARDNESS RATING |
36.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM |
| AHYM |
NOMINAL THREAD DIAMETER |
0.375 INCHES |
| ZZZK |
SPECIFICATION/STANDARD DATA |
80205-NAS517 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
| ZZZX |
DEPARTURE FROM CITED DESIGNATOR |
AS MODIFIED BY SPECIALFEATURES |
| AAJD |
THREAD CLASS |
3A |
| AASK |
HEAD STYLE |
FLAT COUNTERSUNK |
| CQBC |
MINIMUM TENSILE STRENGTH |
160000 POUNDS PER SQUARE INCH |
| AASL |
HEAD DIAMETER |
0.652 INCHES MINIMUM AND 0.653 INCHES MAXIMUM |
| THSD |
THREAD SERIES DESIGNATOR |
UNF |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND |
| AASA |
THREAD LENGTH |
0.511 INCHES MINIMUM AND 0.688 INCHES MAXIMUM |
| CMLP |
THREAD QUANTITY PER INCH |
24 |
| CYAW |
SCREW MATERIAL DOCUMENT AND CLASSIFICATION |
MIL-S-6050 MIL SPEC SINGLE MATERIAL RESPONSE OR AN-S-9 MIL STD SINGLE MATERIAL RESPONSE |
| AASB |
FASTENER LENGTH |
0.797 INCHES MINIMUM AND 0.842 INCHES MAXIMUM |
| CYBA |
SCREW SURFACE TREATMENT |
CADMIUM AND CHROMATE |
| CRSQ |
COUNTERSINK ANGLE |
99.0 DEGREES MINIMUM AND 101.1 DEGREES MAXIMUM |
