| MRC |
Requirement Statement |
Characteristics |
| AASK |
HEAD STYLE |
PAN NO. 2 |
| AAJD |
THREAD CLASS |
2A |
| AASB |
FASTENER LENGTH |
0.670 INCHES NOMINAL |
| AHYM |
NOMINAL THREAD DIAMETER |
0.164 INCHES |
| AASU |
HEAD HEIGHT |
0.085 INCHES MINIMUM AND 0.096 INCHES MAXIMUM |
| MATT |
MATERIAL |
STEEL COMP 304L OR STEEL COMP 316L OR STEEL COMP 302 OR STEEL COMP 347 OR STEEL COMP 321 OR STEEL COMP 317 OR STEEL COMP 316 OR STEEL COMP 310 OR STEEL COMP 309 OR STEEL COMP 305 OR STEEL COMP 304 OR STEEL COMP 301 OR STEEL COMP 303 OR STEEL COMP 303F OR STEEL COMP 303SE OR STEEL COMP 308 OR STEEL COMP 309S OR STEEL COMP 310S OR STEEL COMP 314 OR STEEL COMP 323 OR STEEL COMP 324 OR STEEL COMP 348 OR STEEL COMP 385 OVERALL |
| AAWH |
DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF FIRST DIAMETER |
0.410 INCHES NOMINAL |
| CQBC |
MINIMUM TENSILE STRENGTH |
80000 POUNDS PER SQUARE INCH |
| SFTT |
SURFACE TREATMENT |
OXIDE AND PASSIVATE OVERALL |
| AAWC |
FIRST DIAMETER FROM HEAD |
0.110 INCHES MINIMUM AND 0.120 INCHES MAXIMUM |
| THSD |
THREAD SERIES DESIGNATOR |
UNC |
| CSNG |
EXTERNALLY RELIEVED BODY DIAMETER QUANTITY |
1 |
| AASL |
HEAD DIAMETER |
0.306 INCHES MINIMUM AND 0.322 INCHES MAXIMUM |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND |
| AASA |
THREAD LENGTH |
0.260 INCHES MINIMUM |
| CMLP |
THREAD QUANTITY PER INCH |
32 |
| ABQZ |
INTERNAL DRIVE STYLE |
SLOT |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
MIL-C-13924,CL 3 MIL SPEC 1ST TREATMENT RESPONSE AND MIL-F-14072,FINISH E300 MIL SPEC 2ND TREATMENT RESPONSE OVERALL |
